The Smart Water model has been conceived to facilitate the remote monitoring of the most relevant parameters related to water quality. With this platform you can measure more than 6 parameters, including the most relevant for water...

Smart Water IoT Vertical Kit is equipped with multiple sensors to improve and simplify remote water quality monitoring (pH, Dissolved Oxygen, Conductivity, etc). Using this kit swimming pool conditions can be remotely controlled, and...

The Smart Water Ions models specialize in the measurement of ions concentration for drinking water quality control, agriculture water monitoring, swimming pools or waste water treatment.The Smart Water line is complementary for these...

The Smart Water Ions models specialize in the measurement of ions concentration for drinking water quality control, agriculture water monitoring, swimming pools or waste water treatment.The Smart Water line is complementary for these...

The Smart Water Ions models specialize in the measurement of ions concentration for drinking water quality control, agriculture water monitoring, swimming pools or waste water treatment.The Smart Water line is complementary for these...

The Smart Agriculture models allow to monitor multiple environmental parameters involving a wide range of applications. It has been provided with sensors for air and soil temperature and humidity, solar visible radiation, wind speed and...

Sensor specifications (Leaf Wetness) Resistance Range: 5 kΩ ~ >2 MΩ Output Voltage Range: 1 V ~ 3.3 V Length: 5.5 cm Width: 4 cm The leaf wetness sensor behaves as a resistance of a very high value (infinite, for practical purposes) in...

Sensor specifications (Luxes accuracy) Dynamic range: 0.1 to 40000 Lux Spectral range: 300 – 1100 nm Voltage range: 2.7 – 3.6 V Operating temperature: -30 ºC to +80 ºC Typical consumption: 0.24 mA Maximum consumption: 0.6 mA Usage:...

Sensor specifications (Watermark) Measurement range: 0 ~ 200 cb Frequency range: 50 ~ 10000 Hz approximately Diameter: 22 mm Terminals: AWG 20 The Watermark sensor by Irrometer is a resistive type sensor consisting of two electrodes...

Sensor specifications Measurement range: 0 ~ 100 ºC Accuracy: DIN EN 60751 Resistance (0 ºC): 1000 Ω Diameter: 6 mm Length: 40 mm Cable: ~5 m The resistance of the Pt-1000 sensor varies between approximately 920 Ω and 1200 Ω in the range...

Sensor specifications (SQ-110) Sensibility: 0.200 mV / μmol·m-2s-1 Calibration factor: 5 μmol·m-2s-1 / mV Non-linearity: Non-stability (long-term drift): Spectral range: 410 ~ 655 nm Accuracy: ±5% Repeatability: Diameter: 2.4 cm Height:...

Specification Electrical characteristics Supply voltage: 3.3 V Sleep current typical: 0.1 μA Sleep current maximum: 0.3 μA Tempera tur e sensor Operational range: -40 ~ +85 ºC Full accuracy range: 0 ~ +65 ºC Accuracy: ±1 ºC (range 0 ºC ~...