Sensor specifications Measurement range: 0 ~ 100 ºC Accuracy: DIN EN 60751 Resistance (0 ºC): 1000 Ω Diameter: 6 mm Length: 40 mm Cable: ~5 m The resistance of the Pt-1000 sensor varies between approximately 920 Ω and 1200 Ω in the range...

Sensor specifications (SQ-110) Sensibility: 0.200 mV / μmol·m-2s-1 Calibration factor: 5 μmol·m-2s-1 / mV Non-linearity: Non-stability (long-term drift): Spectral range: 410 ~ 655 nm Accuracy: ±5% Repeatability: Diameter: 2.4 cm Height:...

Specification Electrical characteristics Supply voltage: 3.3 V Sleep current typical: 0.1 μA Sleep current maximum: 0.3 μA Tempera tur e sensor Operational range: -40 ~ +85 ºC Full accuracy range: 0 ~ +65 ºC Accuracy: ±1 ºC (range 0 ºC ~...

I2CXL-MaxSonar®-MB7040™ Operation frequency: 42 kHz Maximum detection distance: 765 cm Interface: Digital bus Power supply: 3.3 V ~ 5 V Consumption (average): 2.1 mA (powered at 3.3 V) – 3.2 mA (powered at 5 V) Consumption (peak): 50 mA...

Sensor specifications (Anemometer) Sensitivity: 2.4 km/h / turn Wind Speed Range: 0 ~ 240 km/h Height: 7.1 cm Arm length: 8.9 cm Connector: RJ11 The anemometer chosen for Waspmote consists of a Reed switch normally open that closes for a...

The Plug & Sense! Smart Agriculture Xtreme is an evolution of our Agriculture line with a new selection of high- end professional sensors. It allows to monitor multiple environmental parameters involving a wide range of applications,...

The Conductivity, water content and soil temperature sensor probe (Decagon 5TE) can measure volumetric water content, electrical conductivity, and temperature of soil. The sensor uses an oscillator running at 70 MHz to measure the...

The Conductivity, water content and soil temperature sensor probe (Decagon GS3) can measure many types of growing media, specially in greenhouse applications where the probe can be inserted easily into different types of soilless...

Dendrometers are highly precise instruments for the continuous measurement of changes in plant diameter (i.e. growth dynamic, diurnal diameter changes). Dendrometer signals document the response of plants to their environment in high...

Frost events may happen in plants even though the ambient temperature is not 0 ºC or lower because the canopy temperature can be different than air temperature, this is called radiation frost. The Leaf and bud temperature sensor probe is...

The Leaf wetness Phytos 31 sensor probe (Decagon Phytos 31) measures leaf surface wetness by measuring the dielectric constant of the sensor’s upper surface. This sensor has very high resolution, which gives you the ability to detect...

The Non-contact surface temperature measurement sensor probe is able to measure the electromagnetic radiation that every object with a temperature above absolute zero emits, which is used to calculate surface temperature from a distance....