Products from Digilent

The Digilent myDigital accessory board for the NI myDAQ and NI myRIO is designed to provide students a cost-effective, portable, and engaging platform for teaching electronics. With a myDAQ / myRIO, NI Multisim, and a myDigital, you'll...

The Digilent Pmod AQS is a digital gas sensor for monitoring indoor air quality at low power. With the AMS CCS811 , you can detect a wide range of Volatile Organic Compounds (VOCs) using the micro-hotplate technology, enabling a highly...

With the High Current Adapter, you can use your NI myRIO to interact with high current applications such as driving LED Strips, relays, and servos. (For motor applications, please see the myRIO Motor Adapter Board.) The High Current...

This cable is a handy accompaniment to your Analog Discovery or Analog Discovery 2. This ribbon cable allows you to extend all 30 pins on the 2x15 pin male connector to a 2x15 pin female connector. The ribbon cable allows the pins of the...

This heatsink is a great way to ensure that none of your chips overheat, and with its convenient clip and adhesive backing, installation and removal is a breeze. The clip will fit perfectly on the Virtex-5 board, or any chip measuring...

This cable is designed to extend reach of the myRIO expansion port (MXP). The MXP extender cable is perfectly suited for mounting expansion boards, such as the Pmod Adapter. Features: 34-pin male and female connectors 8" length (210±10mm)

The Digilent myProto accessory board for the NI myDAQ and NI myRIO brings all your myDAQ/myRIO's signals to breadboard connections where they can be easily accessed using simple jumper wires, and even adds several useful I/O devices. The...

With the Shield Adapter for NI myRIO , you can now connect your myRIO to the expansive shield options offered by the Arduino ecosystem. The Shield Adapter is designed to work with any shield that is compatible with the Arduino® Uno using...

The Motor Adapter for NI myRIO allows you to easily connect and control either one stepper motor, two DC motors, or two servos independently through the MXP connector on your myRIO. It has been designed so that no additional circuitry is...

Features: 2.1mm female power connector for use with Digilent power supplies Useful for any Digilent product that can accept power from an outside source

Features: 40" in length Type A to Type D Micro HDMI cable

Have you been searching for a speaker with a male auxiliary connector and cable that will allow you to blast all of the sounds that your heart desires? With a bandwidth frequency range of 880Hz to 10KHz, this speaker will work seamlessly...