Products from Digilent

Ham Radio Workbench is a podcast that provides bi-weekly discussion on topics of interest to the ham radio operator and anyone interested in hands-on DIY electronics, including developments in ham radio, and hardware and skills necessary...

What is the Analog Discovery Studio? The Analog Discovery Studio is a fully functional, portable test and measurement device that can turn any cross-functional space into a pop-up electronics laboratory. Equipped with 13 instruments,...

The Digilent Cmod S7 is a small, 48-pin DIP form factor board populated with 36 pins and built around a Xilinx Spartan-7 FPGA. The 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are...

The Digilent Cora Z7 is a ready-to-use, low-cost, and easily embeddable development platform designed around the powerful Zynq-7000 All-Programmable System-on-Chip (APSoC) from Xilinx. The Zynq-7000 architecture tightly integrates a...

The Nexys A7 is the new name for our popular Nexys 4 DDR board, now available in two FPGA densities! Featuring the same Artix™-7 field programmable gate array (FPGA) from Xilinx ® , the Nexys A7 is a ready-to-use digital circuit...

Features Large breadboard with rugged steel backing 3x 630 tie point terminal strips included 5x 100 tie point distribution strips included Four screw terminals for power supply connections included 4 adhesive rubber feet included

Standard USB A to mini-B cable, measuring nearly 5ft in length.

Features: Plugs into any USB port and provides a serial connection Allows newer PCs without their own serial ports to program serial-only system boards

Features: Provide power to battery connection on a Digilent Board Provides access to any two signals that are tied to any 100mil spaced pins Cable length is 6.1 inches (15.5 cm)

Features: Standard RJ-45 connectors 10' Category 5E ethernet cable

The NXT Sensor Adapter for the NI myRIO is designed to bring the popular Lego ® Mindstorms ® NXT sensors to the myRIO ecosystem. The NXT Sensor Adaptor connects to one of the 34-pin MXP ports on your NI myRIO and breaks out the myRIO...