Products from Digilent

Does your project need a motor with precise positioning, low-speed torque, and accurate speed control? You’re in luck! Already a popular component in our chipKIT Starter Kit, this 4-phase stepper motor divides its rotation down to 64...

Features: Convenient way to switch from US wall plug to European or UK wall plugs Simple snap-on design Used with Digilent's switching power supplies US to European wall plug adapter

Features: Convenient way to switch from US wall plug to European or UK wall plugs Simple snap-on design Used with Digilent's switching power supplies US to UK wall plug adapter

Vivado Design Suite voucher not included - Vivado Design Suite Edition is available for free download ( Vivado WebPACK ). Arty is a ready-to-use development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from...

The Pmod ACL2 is a 3-axis MEMS accelerometer powered by the Analog Devices ADXL362 . By communicating with the chip via the SPI protocol, users may receive up to 12 bits of resolution for each axis of acceleration. Additionally, this...

The Pmod TMP2 is an ambient temperature sensor powered by the Analog Devices ® ADT7420 . Through the I 2 C interface, users may appreciate a resolution of 0.0078°C through 16 bits of data. Features: 16-bit ambient temperature sensor...

The Pmod ACL is a 3-axis digital accelerometer module that provides input to a system board. Communication via SPI or I 2 C with the on-board Analog Devices ADXL345 allows the user to access up to 13 bits of acceleration data, indicating...

The Pmod HYGRO is a relative humidity sensor with integrated temperature sensor for highly accurate measurements at low power. With the TI HDC1080 , you can determine the relative humidity of the environment with up to 14 bits of...

The Discovery BNC adapter board is intended to be used with the Analog Discovery™ tool to enable the use of standard BNC-terminated test leads and probes. It provides BNC terminations to each of the two oscilloscope channels on the...

The Pmod TMP3 is an ambient temperature sensor built around the Microchip TCN75A . Users may configure the output through I 2 C to up to 12 bits of resolution as well as setting a trigger to occur when a user defined temperature...

The Pmod SD provides a full sized SD card slot that can be accessed through SPI. Features: Full size SD card slot Store and access large amounts of date from your system board No limitation on file system or memory size of SD card used...

The Zybo Z7 is a feature-rich, ready-to-use embedded software and digital circuit development board built around the Xilinx Zynq-7000 family. This is the second generation update to the popular Zybo that was released in 2012. The Zynq...