Products from Bitcraze

One of our goals is to make development with the Crazyflie 2.X as easy as possible. Due to the small size of the platform there are limitations in what connectors we can have and therefore we designed a debug-adapter kit that makes...

Add a prototyping area to your Crazyflie 2.X and lift your electronics into the air. Just solder directly on the expansion board and plug it to the expansion port. For more information, see the Prototyping deck web page Features...

The Z-ranger deck v2 uses a laser sensor to measure the distance to the ground and adds the possibility to fly with precise height control. Using the ToF sensor VL53L1x the Crazyflie 2.X can measure the distance from the sensor to a...

Add the possibility to read and write files to a micro SD card. As an example it could be used for high speed logging or for storing configuration. For more information, see the SD-card deck web page . Features Automatic detection of...

The indoor explorer bundle is great for getting started with our indoor positioning system, Loco positioning. This bundle contains everything you need to start experimenting with autonomous indoor flight. For more information on the Loco...

The Flow breakout board is used for motion tracking and can easily be connected to any robotics project or other design. The motion of a surface, usually the ground, is measured and is reported as delta X, delta Y by the optical flow...

The Roadrunner is a Loco positioning compatible tag that combines the hardware of a Crazyflie with the UWB positioning of the Loco products in a handy package. It's ready for mounting on 3rd party robots and supports power supplies up to...

The active marker deck gives uses robust and long range tracking using Qualisys QTM. The deck supports up to 4 IDs so it's possible to have many different configurations without having to carry around bulky spherical markers. The...

Need to charge your Crazyflie 2.X without connecting the micro-USB cable? Then the Qi 1.2 charging deck is a great option. It supports the same Qi standard as mobile phones up to 1A at 5V. Features Compatible with the WPC v1.2 Qi...

Sometimes LED feedback isn’t enough, like when you’re flying around in a lab or a living room. With the buzzer deck you’ll get audio feedback on system events, like low battery or charging completed. Or why not create your own melodies...

Light up the dark with custom patterns using the Crazyflie 2.X LED-ring expansion board. Featuring 12 strong RGB LEDs facing downwards, you can create custom patterns in firmware that you control from your Android/iPhone or computer. Two...

The Crazyflie Bolt 1.1 is a Crazyflie 2.X compatible flight controller for brushless builds. It is intended to have the strengths of the Crazyflie 2.1, but in a slightly bit bigger package. The Crazyflie Bolt 1.1 runs the same firmware...