Products from UniPi Technology

1-WIRE-T-F-3m temperature sensor is designed for measuring surface temperature of plumbing or pipelines. Suitable for use in boiler rooms, heat exchange stations or heat transfer stations. The 1-WIRE-T-F-3m temperature sensor is based on...

1-WIRE-T-A-120-BOX sensor is designed for measuring the temperature in air conditioning systems or pipelines. Suitable for AC control systems or air conditioning lines. 1-WIRE-T-A-120-BOX temperature sensor is based on the DS18B20 1-Wire...

1-WIRE-T-O indoor/outdoor 1-Wire temperature sensor based on the DS18B20 chip. Suitable for measuring indoor and outdoor temperature in households, office buildings and schools as well as in industrial buildings. 1-WIRE-T-O outdoor...

Protective plastic cover for the UniPi 1.1 , protecting the unit against mechanical damage. The cover is flexible and is attached to the device by cut-out side openings. The UniPi must be already equipped with the DIN rail holder for a...

Plastic cover to protect extension modules for UniPi v 1.1 against mechanical damage. The Cover is not compatible with UniPi 1.1 lite! Plastic cover to protect extension modules for UniPi v 1.1 against mechanical damage. It is flexible...

Holder for easy installation of UniPi onto DIN rail (35 mm). Holder for easy installation of UniPi 1.1 Lite onto DIN rail (35 mm). Along with the product are packed 4 screws of appropriate size and 2 plastic holding pieces. The holder is...

Holder for easy installation of UniPi onto DIN rail (35 mm). Holder for easy installation of UniPi 1.1 onto DIN rail (35 mm). Along with the product are packed 4 screws of appropriate size and 2 plastic holding pieces. The holder is to...

Tool for convenient opening of Wago terminal on UniPi board v1.1. How to open your UniPi’s wago terminal? A screwdriver works, but now you can try new item in our e-shop. It’s Wago operating tool! Works great. It’s easy way how to open...

Holder for easy installation of extension modules for UniPi onto DIN rail (35 mm). Holder for easy installation of extension modules for UniPi 1.1 onto DIN rail (35 mm). Along with the product are packed 4 screws of appropriate size and...

A smart single-phase direct-measurement energy meter supporting communication via Modbus protocol. The PRO1 Series is a range of 1 module, single-phase Smart Energy Meters consisting of 4 different types, each with their specific...

The PRO380 series is a range of smart three-phase (4 DIN module size) energy meters, each with its own specific characteristics. PRO380 combines a high accuracy class (1/B) and a wide operating temperature range (-40°C - +70°C). The...

Communication converter for connecting M-Bus devices into systems using the RS485 interface. RS485toMbus-4M converter is designed for connecting devices using the M-Bus interface into systems communicating with various sensors and meters...