Products from Pololu Electronics

These shorting blocks make great removable jumpers and fit standard 0.1" male header pins. 0.100" (2.54 mm) shorting blocks of assorted colors on a 0.1" header strip.

These shorting blocks make great removable jumpers and fit standard 0.1" male header pins. 0.100" (2.54 mm) shorting blocks of assorted colors on a 0.1" header strip.

These shorting blocks make great removable jumpers and fit standard 0.1" male header pins. 0.100" (2.54 mm) shorting blocks of assorted colors on a 0.1" header strip.

These universal mounting hubs are designed to work with most 6 mm diameter shafts , including round shafts and “D” shafts. Each of the two included hubs has six mounting holes for M3 screws (not included), letting you mount custom wheels...

These 0.1" female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The standard spacing is the same as on most solderless breadboards and matches 0.1" male header strips . Our...

This product is a carrier board for Texas Instruments’ DRV887x family of motor drivers; we therefore recommend careful reading of the corresponding driver’s datasheet before using this product. Three pin-compatible versions are available...

The Pololu AltIMU-10 v6 is a compact (1.0″ × 0.5″) board that combines ST’s LSM6DSO 3-axis gyroscope and 3-axis accelerometer, LIS3MDL 3-axis magnetometer, and LPS22DF digital barometer to form an inertial measurement unit (IMU) and...

The Pololu MinIMU-9 v6 is a compact (0.8″ × 0.5″) board that combines ST’s LSM6DSO 3-axis gyroscope and 3-axis accelerometer and LIS3MDL 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore recommend careful...

The 3pi+ 2040 is a versatile, high-performance, user-programmable robot that measures just 9.7 cm (3.8″) in diameter. At its heart is a Raspberry Pi RP2040 microcontroller (like the one on the Raspberry Pi Pico), a 32-bit dual-core Arm...

These wheels are great for robotics, custom RC vehicles, or any other project you need to get rolling. They measure 80 mm (3.15″) in diameter and are designed to press-fit securely onto D output shafts with a diameter of 3 mm. They are...

This sensor is a carrier/breakout board for ST’s VL53L5CX laser-ranging sensor, which offers fast and accurate ranging up to 4 m through a digital I²C interface. It can measure absolute distances to multiple targets simultaneously across...

The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Motoron boards can be...