Products from Pololu Electronics

This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 4.5 V, allowing for a holding torque of 14 kg-cm (190 oz-in). Overview...

This 12 V light-duty (LD) linear actuator with a 20:1 gear reduction can lift loads up to 50 kgf [110 lbs or 500 N] and can withstand static loads up to 250 kgf [550 lbs or 2500 N]. It has a maximum speed of 14.6 mm/s [0.57″/s] at no...

Description The Pololu AltIMU-10 v5 is an inertial measurement unit (IMU) and altimeter that features the same LSM6DS33 gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v5 , and adds an LPS25H digital barometer. An I²C...

This module is a compact breakout board for ST’s high-power VNH5019 motor driver IC, a fully integrated H-bridge that can be used for bidirectional speed control of a single brushed DC motor. The basic operation of the driver is...

This 10 ft (3 m) extension cable is designed to work with Glideforce light-duty and medium-duty linear actuators with feedback . It consists of five 20 AWG wires terminated on one end with male power and feedback connectors that securely...

This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped...

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power...

This compact, inexpensive plastic gearmotor ( high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range....

This bracket was designed specifically for the Glideforce Light-Duty (LD) linear actuators . It is machined out of a single piece of aluminum and has been tested to 310 kgf [700 lbs or 3100 N] of static load, which is well above the...

Getting started with the Maestro Servo Controller Overview Maestro family of USB servo controllers: Mini 24, Mini 18, Mini 12, and Micro 6 The Mini Maestros are highly versatile (and compact) servo controllers and general-purpose I/O...

Description These aluminum gearmotor brackets let you securely mount Pololu’s 25D mm metal gearmotors to your project. The brackets are sold in pairs , and each bracket includes two M3 screws for securing the motor to the bracket. Each...

These tiny brushed DC gearmotors have a diameter of just 6 mm and weigh just over a gram, which makes them great actuators for miniature robots and very small mechanisms. They consist of a coreless motor fastened to a 26:1 or 136:1...