Products from MGSL

Product Overview Digi XBee 3 Zigbee 3.0 module Silicon Labs EFR32MG SoC RF 250Kbps, serial up to 1Mbps ISM 2.4GHz band UART, SPI, I2C interface Through hole mounting RPSMA antenna DSSS (Direct Sequence Spread Spectrum) Supply voltage of...

Product Description Hardware Specifications Chipset:ESP32, dual-core MCU, PMU power management FLASH:QSPI flash 16MB SRAM:520 KB SRAM / PSRAM 8MB Button:Power key USB to TTL:CP2104 On-board clock:40MHz crystal oscillator Working...

Specification Contact Plating - Gold Plated Contact Contact Material - Copper nikal Silion Contact Gender - Socket Wire size AWG Min - 20AWG Wire size AWG Max - 18AWG

NVIDIA Jetson Nano Developer Kit is a small, powerful computer that lets you run multiple neural networks in parallel for applications like image classification, object detection, segmentation, and speech processing. All in an...

Dedicated Cooling Fan for Jetson Nano, 5V, 3PIN Reverse-proof Category: Jetson Nano cooling fan Connector: 3PIN reverse-proof connector Spec: 5V Dimensions: 40mm×40mm×10mm

The BT-100 is a wideband bias tee TX Power Amplifier (PA) that draws its current from the bladeRF 2.0 micro’s SMA connectors. The BT-100 is versatile PA that is an ideal intermediary or final stage amplifier in a TX chain. bladeRF-cli...

The BT-200 is a wideband bias-tee RX Low Noise Amplifier that draws its current from the bladeRF 2.0 micro’s SMA connectors. The BT-200 is a compact LNA solution useful for substantially lowering the noise figure and substantially...

This is a general purpose tri-band antenna that covers 700MHz to 2600MHz. It is a good fit as a starter antenna for research and experimentation in the ISM bands. Product includes: 1x Tri-Band Antenna Highlights: Type: Durable Rubber...

The case fits the bladeRF 2.0 micro. A set of screws are included for assembly. The enclosure is made of a high density yet clear PolyCarbonate material that can withstand a great amount of stress. Product includes: 1x bladeRF 2.0 micro...

5V, 4A Switching Power Supply. This is best suitable for nvidia jetson nano developer kit Plug type: 5.5mm OD / 2.1mm ID 'coaxial' DC plug Input: 110V-220V AC Output: ~5V DC up to 4A

The Developer Kit for NVIDIA ® Jetson Xavier NX ™ includes a power-efficient, compact Jetson Xavier NX module for AI edge devices. It benefits from new cloud-native support, and accelerates the NVIDIA software stack in as little as 10 W...

Optical Rain Sensor Use it to measure rainfall or to close a skylight when it starts raining. The RG-11 Rain Gauge senses water hitting its outside surface using beams of infrared light. It uses the same sensing principle used in...