Products from MGSL

The MCP6004 is a quad general purpose op amp offering rail-to-rail input and output over the 1.8 to 6V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6004 is...

The AD620 is a low cost, high accuracy instrumentation amplifier that requires only one external resistor to set gains of 1 to 10,000. Furthermore, the AD620 features 8-lead SOIC and DIP packaging that is smaller than discrete designs...

The JFET-input operational amplifiers in the TL07x series are similar to the TL08x series, with low input bias and offset currents and fast slew rate. The low harmonic distortion and low noise make the TL07x series ideally suited for...

This is a miniature battery charger based on the TP4056 integrated circuit. It is ideal for adding an embedded battery charger to your new project. Features Adjustable charging current (max 1 A) Input voltage from 4.5 V to 5.5 V Charging...

Description: ESC For brushless Motor Continuous Output Current: 40A Max Current: 50A UBEC: 4A DC:3.7V-14.8V BEC:3A / 5V (Switch) High rate PWM Low resistance Sixteen cells Max (with BEC disabled) User programmable brake Low voltage auto...

Features piranha LED:24pcs Color: Cool White size : 80x28cm Light board four corners with a fixed screw hole, Easy fixed Input voltage: DC 10-14V (Recommended 12V DC) Operating current: about 160MA Power: about 1.6W can use about 50000...

Product Information SENSOR, OPTICAL, 4MM, TRANSISTOR O/P Sensor Output1: Phototransistor Collector Emitter Voltage V(br)ceo: 32V Forward Current If: 50mA Forward Voltage: 1.25V Reverse Voltage Vr: 5V Sensing Distance: 4mm Sensor...

This is a Double-Side PCB Circuit Board. A side for pin pitch size 0.8mm, It can be used for most of the QFP?TQFP?LQFP?FQFP (compatible with 32pin~64pin) to 2.54mm DIP. B side for pin pitch size 0.5mm, It can be used for most of the...

This is a 4-in-1 SIM Card Adapter, a three small pieces of non-aging plastic that give you the ability to turn your nano or micro SIM into a card the next size up for your cellular project. This adapter is able to convert a nano sized...

Positive Side: QFN20 LFCSP20 (Body 4x4mm,Pitch=0.5MM) turn DIP20 (2.54 pitch) Reverse Side: QFN20 (Body 4x4mm,Pitch=0.65MM) turn DIP20 (2.54 pitch) Pitch 2.54mm Suitable for Breadboard, directly Plug in Breadboard

The PCB board has two sides. A side for pin pitch size 2.30mm, It can be used to convert SOT223 to SIP3 (2.54mm pin pitch). B side for pin pitch size 1.50mm, It can be used to convert SOT89 to SIP3 (2.54mm pin pitch). The PCB board...

This is a Double-Side PCB Circuit Board, Each PCB board has 20 pins. A side for pin pitch size 0.65mm, It can be used for most of the MSOP20, SSOP20, TSSOP20 to 2.54mm DIP. B side for pin pitch size 1.27mm, It can be used for most of the...