Products from MGSL

This is a small device called a reed switch . When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the reeds separate and the...

DPDT Push-On/Push-Off Switch. Works great as general control switch.

The ATtiny84 is another of Atmel's little tiny 8-Bit Processors. 8K of program space, 12 I/O lines, and 8-channel 10 bit ADC. It will run up to 20MHz with an external crystal and can be programmed in circuit.

The MM74HC574 high speed octal D-type flip-flops utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive...

The ATmega8U2 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega8U2 achieves throughputs approaching 1 MIPS per MHz allowing the...

The ATmega2560 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega2560 achieves throughputs approaching 1 MIPS per MHz allowing the...

The 4N25,4N26,4N27,4N28 Series of optically coupled isolators consist of infrared light emitting Diode and NPN silicon photo transistor in a standerd 6 pin dual in line plastic package.

The DS1307 serial real-time clock (RTC) is a lowpower, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I2 C, bidirectional bus. The clock/calendar provides...

The MAX756/MAX757 are CMOS step-up DC-DC switching regulators for small, low input voltage or battery-powered systems. The MAX756 accepts a positive input voltage down to 0.7V and converts to a higher pin selectable output voltage or...

The LM1117 is a series of low dropout voltage regulators with a dropout of 1.2V at 800mA of load current. It has the same pin-out as National Semiconductors Industry standard LM317. The Lm1117 is available in an adjustable version, which...

The LM1117 is a series of low dropout voltage regulators with a dropout of 1.2V at 800mA of load current. It has the same pin-out as National Semiconductor's industry standard LM317.The LM1117 is available in an adjustable version, which...

Features Fast response which is well suited to high speed modulated light detection : tr, tf = 50 ns (typ.) High sensitivity, high reliability Peak sensitivity wavelength matched with infrared light emitting diodes : λP = 900 nm (typ.)...