This Raspberry Pi HAT features multi communication functionalities: NB-IoT, eMTC, EDGE, GPRS, and GNSS. The NB-IoT (NarrowBand-Internet of Things) and eMTC (enhanced Machine Type Communication) are rising IoT communication technologies...

Raspberry Pi Pico Evaluation Kit Type B Pico unit & Three basic expansion boards Comes With Demo Code For GPIO, PWM, I2C, SPI... What's In The Kit Raspberry Pi Pico With Pre-Soldered Header A Low-Cost, High-Performance Microcontroller...

Dual GPIO Expander For Pico Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers Features At A Glance Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper...

Precision RTC Module For Pico Incorporates High Precision RTC Chip DS3231 Features At A Glance The Pico-RTC-DS3231 is a RTC expansion module specialized for Raspberry Pi Pico. It incorporates high precision RTC chip DS3231 and uses I2C...

Overview The Li-ion Battery HAT integrates SW6106 power bank management chip, allows providing 5V regulated power supply to your Pi from a 14500 battery, makes the Pi becomes a portable device. It will charge the battery as well,...

8MP IR-CUT CAMERA MODULE IMX219 Sensor, 8MP, Comes With Infrared LEDs Embedded IR-CUT, Eliminating The Reddish Issue Of Normal IR Cameras On Daylight Specifications PIXELS 8MP SENSOR IMX219 CAMERA Sensor size 1/4 inch Aperture (F) 2.7...

3-CH RELAY FOR JETSON NANO 3 Channels Relay Control Configurable Control Pin, Up To 2x Stackable Features At A Glance Standard 40PIN GPIO header, directly pluggable onto the Jetson Nano Incorporate quality relay component, max load: ≤5A...

For the controller option, you can choose 1) micro:bit original version, 2) micro:bit V2, or 3) without a micro:bit (accessories only). KitiBot X Micro:bit Tracked Robot When KitiBot meets micro:bit , when kids meet programming, the...

Jetson Nano Metal Case Specialized For Jetson Nano 2GB Developer Kit Mini PC Chassis Design, Solid Metal Body * image for reference ONLY, please check the package content for exact part list. Special Camera Holder With Camera Mounting...

1.28" ROUND LCD DISPLAY MODULE Embedded GC9A01 Driver, Using SPI Bus Comes with examples for Raspberry Pi, Arduino, STM32, etc. Size - 1.28" Resolution - 240×240 Display Color - 65K RGB Interface - SPI Driver - GC9A01 Features At A...

Overview This is a 2-DOF pan-tilt kit designed for Raspberry Pi. With onboard PCA9685 PWM chip and TSL25911FN ambient light sensor, it allows the Pi to control camera movement and sense light intensity through I2C interface. Features...

This is the NodeMCU development board based on ESP32, features WiFi+Bluetooth connectivity, onboard CP2102 and keys. What's more, all the I/O pins of ESP-WROOM-32 module are accessible via the extension headers. Thanks to the rich...