Top seller
No results were found for the filter!
Foot Pedal Switch Put the pedal to the metal with this metal foot switch. This is the same kind of foot pedal you might find switching the power supply for a tattoo machine or as a sustain pedal on an electric piano. The non-slip pad on top and rubber...
₹ 589.00 *
SST Liquid Level Sensor The SST Liquid Level Sensor provides single point liquid detection via a TTL compatible push/pull output. This optical liquid level sensor features a miniature design that allows for installation in areas where space is limited. Thanks...
₹ 2,999.00 *
SparkFun RGB Light Sensor - ISL29125 If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 breakout board makes...
₹ 1,099.00 *
Piezo Vibration Sensor - Small Vertical The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and...
₹ 299.00 *
Piezo Vibration Sensor - Small Horizontal The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and...
₹ 289.00 *
SparkFun USB Host Shield This new version corrects the pin out for the GPX and RESET pins. The SparkFun USB Host Shield contains all of the digital logic and analog circuitry necessary to implement a full-speed USB peripheral/host controller with your Arduino....
₹ 3,129.00 *
Arduino and Breadboard Holder We’ve been prototyping for a long time on these awesome little plastic plates but it’s time for an upgrade. This version still holds an Arduino and a self-adhesive clear breadboard but we’ve done away with the plastic clips and now...
₹ 389.00 *
SparkFun Arduino Pro Mini 328 - 3.3V/8MHz It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any...
₹ 989.00 *
SparkFun Humidity and Temperature Sensor... The Si7021 is a low-cost, easy-to-use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and data logging and perfect for build a weather stations or humidor control system. All you...
₹ 789.00 *
EL Wire - Blue-Green 3m EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors (check below for other colors) and...
₹ 989.00 *
LED Tactile Button - Red This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up red! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA....
₹ 59.00 *
LED Tactile Button - Orange This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up Orange! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for...
₹ 59.00 *
SparkFun Triple RockBLOCK Mk2 - SparkFun GNSS Power Cell - MyoWare 2.0 bladeRF 2.0 SpeakJet Circuit Scribe SparkFun SparkFun USB2.0 Raspberry Pi 3 SparkFun 16 Himax CMOS RedBot Gas Sensor SparkFun Qwiic Servo - Generic SparkFun GPS LED - 5mm Teensy 4.0 Alchitry Au ESP32-C3 Mini SparkFun Air Weather Meter SparkFun USB to SparkFun Triad SparkFun Teensy 4.1 VoiceBox Shield RockBLOCK 9603 SparkFun ESP32 Pixy 2 CMUcam5 SparkFun Pro LoRa Pulse Sensor Voice Modulator Pixy 2 CMUcam5 LED Basic 5mm Zumo 2040 Robot SparkFun MP3 SparkFun Teensy 2.0 GPS Antenna EeonTex J-Link EDU Mini
Viewed