Top seller
No results were found for the filter!
SST Liquid Level Sensor The SST Liquid Level Sensor provides single point liquid detection via a TTL compatible push/pull output. This optical liquid level sensor features a miniature design that allows for installation in areas where space is limited. Thanks...
₹ 2,999.00 *
SparkFun Serial Basic Breakout - CH340G The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers. The...
₹ 789.00 *
SparkFun RGB Light Sensor - ISL29125 If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 breakout board makes...
₹ 1,099.00 *
Piezo Vibration Sensor - Small Vertical The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and...
₹ 299.00 *
Piezo Vibration Sensor - Small Horizontal The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and...
₹ 289.00 *
SparkFun USB Host Shield This new version corrects the pin out for the GPX and RESET pins. The SparkFun USB Host Shield contains all of the digital logic and analog circuitry necessary to implement a full-speed USB peripheral/host controller with your Arduino....
₹ 3,129.00 *
Arduino and Breadboard Holder We’ve been prototyping for a long time on these awesome little plastic plates but it’s time for an upgrade. This version still holds an Arduino and a self-adhesive clear breadboard but we’ve done away with the plastic clips and now...
₹ 389.00 *
SparkFun Arduino Pro Mini 328 - 3.3V/8MHz It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any...
₹ 989.00 *
SparkFun Humidity and Temperature Sensor... The Si7021 is a low-cost, easy-to-use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and data logging and perfect for build a weather stations or humidor control system. All you...
₹ 789.00 *
EL Wire - Blue-Green 3m EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors (check below for other colors) and...
₹ 989.00 *
LED Tactile Button - Red This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up red! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA....
₹ 59.00 *
LED Tactile Button - Orange This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up Orange! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for...
₹ 59.00 *
LilyPad Coin EL Wire - Polymer Lithium S-Video Cable - Electric Hobby SparkFun Solder Tip SparkFun Block WS2801 IC SparkFun Concave Button RFID Tag - Garmin Graphic LCD Slide Pot - SparkFun WiFi SparkFun Triple Light to Tool Kit - SparkFun Block SparkFun Qwiic H-Bridge Motor GNSS L1 L5 SparkFun LED - 5mm SparkFun RFID ArduPilot Mega Flexinol - Magnetic Card 7-Segment Slide Pot - Interface Cable SparkFun SparkFun Triple SparkFun Pulse SparkFun USB Li-Ion Polymer T Rex Robot Copper Tape - LED Cycling RGB SparkFun Sunny Flexiforce HackRF One from Micro Gearmotor LED String Himax CMOS
Viewed