Top seller
No results were found for the filter!
Overview This breakout board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, +5V VCC, and an analog voltage output—that are broken out with a 0.1" spacing, making the board...
₹ 99.00 *
The Tamiya slick tire set contains four wheels with arched tires, each with a diameter of 31 mm (1.2") and a width of 10 mm (0.4"). These wheels are compatible with Tamiya gearbox kits with 3mm-hex shafts The Tamiya 70192 slick tire set...
₹ 519.00 *
The Tamiya 70111 sports tire set contains two attractive racing-style wheels, each 56 mm in diameter and 25 mm wide. These wheels are compatible with all Tamiya gearbox kits. The Tamiya 70111 sports tire set includes the following: Two...
₹ 869.00 *
The two extremely springy tires in the Tamiya 70096 off-road tires set are about 50 mm in diameter and 30 mm wide. Use these if you want your robot to have a soft, air-cushioned ride across rough terrain. (Compatible with the Tamiya...
₹ 469.00 *
The Tamiya 70194 spike tire set includes two wheels designed for bumpy and rough surfaces, each with a diameter of 65 mm (2.56") and a width of 26 mm (1.02"). These wheels are compatible with all Tamiya gearbox kits. The Tamiya 70194...
₹ 1,139.00 *
This plastic Futaba servo wheel is made to match Futaba servo splines, such as those on theSpringRC SM-S4303R and Power HD AR-3606HB continuous rotation servos. The wheel is molded from ABS and measures just under 2-5/8" across by 0.3"...
₹ 349.00 *
This plastic Futaba servo wheel is made to match Futaba servo splines, such as those on theSpringRC SM-S4303R and Power HD AR-3606HB continuous rotation servos. The wheel is molded from ABS and measures just under 2-5/8" across by 0.3"...
₹ 349.00 *
The Solarbotics SW wheel is compatible with standard Futaba servo hubs such as those on theSpringRC SM-S4303R and Power HD AR-3606HB continuous rotation servos. The plastic wheel is molded from ABS and has a molded-on thermoplastic...
₹ 399.00 *
The Pololu Wixel is a general-purpose programmable module featuring a 2.4 GHz radio and USB. You can write your own software or load precompiled, open-source apps onto the TI CC2511F32 microcontroller at the heart of the Wixel, turning...
₹ 2,269.00 *
The Pololu Wixel is a general-purpose programmable module featuring a 2.4 GHz radio and USB. You can write your own software or load precompiled, open-source apps onto the TI CC2511F32 microcontroller at the heart of the Wixel, turning...
₹ 1,979.00 *
The GP2Y0A21 Sharp distance sensor is a great way to add obstacle avoidance or motion sensing to your robot or any other project. With a detection range of 4" to 32" and an analog voltage indicating the distance, this sensor is very easy...
₹ 1,679.00 *
Overview This current sensor is a carrier board or breakout board for Allegro’s ACS709LLFTR-35BB-T Hall effect-based linear current sensor with overcurrent fault output; we therefore recommend careful reading of the ACS709 datasheet...
₹ 1,099.00 *
Nylon Spacer DRV8825 Stepper Pololu IR Tic 36v4 USB Wires with Pololu Digital Pololu 3.3V RoboClaw 2x30A Pololu Pololu 38 kHz Tamiya 70190 QTR-8RC Pololu 5V 1A Glideforce AltIMU-10 v6 Pololu G2 Machine Screw QTRX-HD-02A 3-Channel Wide Carbon Monoxide Wires with Pololu G2 5V Step-Up Pololu 12V FEETECH FS90 5V 5.5A Motoron M3H256 Glideforce Machine Screw Mini Maestro Pololu 5V Pololu RC ARM mbed NXP QTRX-HD-04A QTRX-MD-08RC 12V Step-Up Machine Screw Pololu Dual High-Power ARM mbed DRV8880 Stepper Glideforce AltIMU-10 v3 Micro Maestro DRV8825 Stepper Bracket Pair
Viewed