Top seller
No results were found for the filter!
Shunt Regulator: 33.0V, 4.00Ω, 9W This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a fixed set point of 33.0 V , a shunt resistance of 4.00 ohms , and twelve SMT shunt resistors...
₹ 1,549.00 *
Shunt Regulator: 13.2V, 1.33Ω, 9W This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a fixed set point of 13.2 V , a shunt resistance of 1.33 ohms , and twelve SMT shunt resistors...
₹ 1,549.00 *
Shunt Regulator: Fine-Adjust LV, 1.50Ω, 15W This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a precision-adjustable set point (4 V to 18 V) , a shunt resistance of 1.50 ohms , and a total of...
₹ 3,149.00 *
Shunt Regulator: 33.0 V, 32.8Ω, 3W This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a fixed set point of 33.0 V , a shunt resistance of 32.8 ohms , and four SMT shunt resistors...
₹ 1,389.00 *
Shunt Regulator: Fine-Adjust HV, 4.10Ω, 15W This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a precision-adjustable set point (4 V to 35 V) , a shunt resistance of 4.10 ohms , and a total of...
₹ 3,149.00 *
Mounting Bracket for Standard-Size Servos This plastic bracket provides a convenient way to mount standard-size servos with a side flat to a surface. Rear view of Power HD Continuous Rotation Servo AR-3606HB and Solarbotics red servo wheel with Mounting Bracket for Standard-Size...
₹ 439.00 *
A-Star 32U4 Mini SV The A-Star 32U4 Mini SV is a programmable module based on the ATmega32U4 from Microchip (formerly Atmel). Unlike competing products, it has an on-board switching step-down regulator that allows it to be powered efficiently from a 5 V to...
₹ 4,049.00 *
STSPIN820 Stepper Motor Driver Carrier... This version of our STSPIN820 Stepper Motor Driver Compact Carrier ships with male header pins installed as shown in the main product picture, so no soldering is required to use it with an appropriate 16-pin socket or solderless...
₹ 2,689.00 *
STSPIN820 Stepper Motor Driver Carrier This breakout board for STMicro’s STSPIN820 microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and a wide operating range of 7 V to 45 V. It can deliver up to approximately 0.9 A per phase continuously...
₹ 2,559.00 *
ACS709 Current Sensor Carrier -75 to +75A Overview This current sensor is a carrier board or breakout board for Allegro’s ACS709LLFTR-35BB-T Hall effect-based linear current sensor with overcurrent fault output; we therefore recommend careful reading of the ACS709 datasheet...
₹ 1,099.00 *
75:1 Micro Metal Gearmotor HP 6V These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start...
₹ 3,339.00 *
Pololu Ball Caster with 3/8" Plastic Ball This ball caster kit includes a black ABS housing, a 1/2" diameter plastic ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of the ball caster, 0.53", can be increased to about 0.7" using the included...
₹ 349.00 *
FPF1320 Power 5V 6A Step-Down Stepper Motor Mini MOSFET 3-Channel Wide Snap Circuits L3GD20 3-Axis Pololu Pololu 3.3V 1A Pololu 9V MinIMU-9 v5 Pololu 1.8V Pololu Simple 10 1 Micro ACHS-7125 VL53L1X MC33926 Motor AltIMU-10 v3 QTR-HD-04RC Force-Sensing AltIMU-10 v5 Pololu Pololu 3pi 10 1 Micro Wires with Pololu Dual 131 1 Metal Pololu m3pi Glideforce QTR-8RC Motoron M3H256 DRV8825 Stepper A4988 Stepper Mini Pushbutton A5984 Stepper 75 1 Metal Tic T834 USB DRV8833 Dual Force-Sensing Wires with Pololu G2 Pololu 5V 5A Mini Pushbutton TPS2113A Power AltIMU-10 Gyro RoboClaw Solo
Viewed