Top seller
No results were found for the filter!
Tic T834 USB Multi-Interface Stepper Motor... The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C,...
₹ 4,149.00 *
Machine Screw: M3, 14mm Length, Phillips (25-pack) This M3, pan-head screw is 12 mm long. It is made from steel, is zinc-plated, and comes in packs of 25. Dimensions Length: 14 mm General Specification Thread type: M3
₹ 129.00 *
Machine Screw: M3, 20mm Length, Phillips (25-pack) This M3, pan-head screw is 20 mm long. It is made from steel, is zinc-plated, and comes in packs of 25. Dimensions Length: 20 mm General Specification Thread type: M3
₹ 449.00 *
Metal Servo Horn for Power HD Giant Servo... This is an anodized aluminum servo horn for the Power HD Ultra-High-Torque, High-Voltage Digital Giant Servo HD-1235MG. The HD-1235 ships with a set of plastic horns, but metal is the way to go if you want to get the most torque out of...
₹ 889.00 *
298:1 Micro Metal Gearmotor MP 6V These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power...
₹ 2,399.00 *
Glideforce LACT4P-12V-05 Light-Duty Linear... This 12 V light-duty (LD) linear actuator with a 5:1 gear reduction can lift loads up to 15 kgf [34 lbs or 150 N] and can withstand static loads up to 250 kgf [550 lbs or 2500 N]. It has a maximum speed of 43.9 mm/s [1.73″/s] at no load...
₹ 19,349.00 *
MinIMU-9 v5 Gyro, Accelerometer, and Compass Description The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board. An I²C interface accesses nine...
₹ 2,969.00 *
Wild Thumper Wheel 120x60mm Pair with 4mm Shaft... These two large (120mm-diameter) wheels from Dagu Electronics match those on the Dagu Wild Thumper chassis and can be used as replacement parts or for custom robots that need to traverse complex, rugged terrain. The black tires are made...
₹ 1,779.00 *
Pololu 5" Robot Chassis RRC04A Solid Red The 5" robot chassis RRC04A is an 1/8" acrylic chassis that provides a base for our micro metal gearmotors, extended brackets , and 42×19mm wheels . The robot chassis has many mounting holes that let you mount a variety of robot...
₹ 789.00 *
DRV8801 Single Brushed DC Motor Driver Carrier Overview DRV8801 single brushed DC motor driver carrier with dimensions. Texas Instruments’ DRV8801 is a tiny H-bridge motor driver IC that can be used for bidirectional control of a single brushed DC motor at 8 V to 36 V. It can supply...
₹ 1,269.00 *
Pololu TReX Jr Dual Motor Controller DMC02 This lower-power, smaller, and lower-cost version of the TReX is the ultimate general-purpose motor controller for small motors: it has a wide operating range (5 to 24 V), delivers 2.5 A continuously per motor, provides current sensing...
₹ 9,889.00 *
Pololu TReX Dual Motor Controller DMC01 The TReX blends RC, analog, and serial inputs for a powerful motor control solution capable of delivering a continuous 13 A per motor. The TReX will work right out of the box as an electronic speed control (ESC), but its ability to...
₹ 17,799.00 *
Pololu 5V 5A A4988 Stepper Glideforce AltIMU-10 Gyro 10 1 Micro VL53L1X Stepper Motor Force-Sensing TPS2113A Power QTR-8RC Pololu 3pi AltIMU-10 v5 Pololu Wires with 3-Channel Wide 5V 6A Step-Down QTR-HD-04RC Mini Pushbutton Tic T834 USB DRV8833 Dual Pololu Simple MinIMU-9 v5 A5984 Stepper Pololu m3pi Motoron M3H256 MC33926 Motor Pololu 131 1 Metal Pololu Dual Mini Pushbutton L3GD20 3-Axis Force-Sensing Pololu 3.3V 1A 75 1 Metal DRV8825 Stepper Pololu 1.8V Snap Circuits Mini MOSFET Pololu G2 FPF1320 Power Wires with ACHS-7125 AltIMU-10 v3 Pololu 9V 10 1 Micro RoboClaw Solo
Viewed