Overview A5984 Stepper Motor Driver Carrier, Fixed 500mA@5V / 330mA@3.3V (Soldered Header Pins). A5984 Stepper Motor Driver Carrier, Fixed 500mA@5V / 330mA@3.3V (Soldered Header Pins), top view. This product is the A5984 carrier with a...

This product is the A5984 carrier with a fixed current limit of 1 A (VDD = 5 V) or 660 mA (VDD = 3.3 V) . This version has soldered headers as shown in the pictures above, so no soldering is required to use it with an appropriate 16-pin...

We are offering these carrier boards with support from Allegro Microsystems as an easy way to control bipolar stepper motors using their A5984 DMOS Microstepping Driver with Translator and Overcurrent Protection; we therefore recommend...

Details for item #4565 This product is 6″ (15 cm) long with male connectors on both ends. Ribbon Cable Premium Jumper Wires 10-Color M-M 6″ (15 cm). Premium jumper wire family overview These premium 26 AWG stranded copper jumper wires...

We are offering these breakout boards with support from Allegro Microsystems as an easy way to use or evaluate their CT432/CT433 tunneling magnetoresistance (TMR), electrically isolated, high-bandwidth current sensors that are optimized...

We are offering these breakout boards with support from Allegro Microsystems as an easy way to use or evaluate their ACS37220 Hall effect-based, electrically isolated current sensors with user-configurable overcurrent fault output; we...

Details for item #4563 This product is 6″ (15 cm) long with female connectors on both ends. Ribbon Cable Premium Jumper Wires 10-Color F-F 6″ (15 cm). Premium jumper wire family overview These premium 26 AWG stranded copper jumper wires...

Details for item #4564 This product is 6″ (15 cm) long with male connectors on one end and female connectors on the other end. Ribbon Cable Premium Jumper Wires 10-Color M-F 6″ (15 cm). Premium jumper wire family overview These premium...

This set contains components for adding a tracked drive system to a small robot or vehicle. It consists of: Two silicone tracks Two ABS drive sprockets Two ABS idler sprockets Two M3 shoulder bolts with a 5mm threaded portion Two M3...

This board is a 3-channel time-of-flight proximity and distance sensor module based on the OPT3101 IC from Texas Instruments. Unlike conventional IR sensors that use the intensity of reflected light to estimate the distance to an object,...

The Pololu USB AVR Programmer v2.1 is a compact, low-cost in-system programmer (ISP) for AVR microcontrollers from Atmel (now a part of Microchip). The programmer provides an interface for transferring a compiled AVR program from your...

The Pololu High-Power Stepper Motor Driver 36v8 combines the DRV8711 stepper motor driver IC from Texas Instruments with external MOSFETs to enable control of large bipolar stepper motors at operating voltages from 8 V to 50 V. The...