Close filters
 
  •  
  •  
from to
19 From 66
No results were found for the filter!
Wires with Pre-Crimped Terminals 10-Pack F-F 2" Green
Wires with Pre-Crimped Terminals 10-Pack F-F 2"...
These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connector housings on the ends. By combining these wires with our crimp connector housings , you can quickly and easily create custom...
₹ 219.00 *
0.1" (2.54mm) Crimp Connector Housing: 2x2-Pin 10-Pack
0.1" (2.54mm) Crimp Connector Housing: 2x2-Pin...
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards . Just...
₹ 149.00 *
0.1" (2.54mm) Crimp Connector Housing: 2x12-Pin 5-Pack
0.1" (2.54mm) Crimp Connector Housing: 2x12-Pin...
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards . Just...
₹ 279.00 *
Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Top Entry (4-Pack)
Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Top...
These terminal blocks have terminals that hold and release wires through the simple adjustment of a screw, allowing you to easily make temporary connections to a PCB. The 2-pin and 3-pin units each feature a ridge on one side and a slot...
₹ 199.00 *
Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V
Magnetic Encoder Pair Kit with Top-Entry...
Add quadrature encoders to your micro metal gearmotors ( extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate...
₹ 989.00 *
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin...
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards . Just...
₹ 219.00 *
0.1" (2.54mm) Crimp Connector Housing: 2x7-Pin 5-Pack
0.1" (2.54mm) Crimp Connector Housing: 2x7-Pin...
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards . Just...
₹ 209.00 *
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin...
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards . Just...
₹ 159.00 *
0.1" (2.54mm) Crimp Connector Housing: 1x8-Pin 10-Pack
0.1" (2.54mm) Crimp Connector Housing: 1x8-Pin...
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards . Just...
₹ 219.00 *
0.1" (2.54mm) Crimp Connector Housing: 2x4-Pin 10-Pack
0.1" (2.54mm) Crimp Connector Housing: 2x4-Pin...
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards . Just...
₹ 199.00 *
0.1" (2.54mm) Crimp Connector Housing: 2x3-Pin 10-Pack
0.1" (2.54mm) Crimp Connector Housing: 2x3-Pin...
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards . Just...
₹ 179.00 *
Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V
Magnetic Encoder Pair Kit with Side-Entry...
Add quadrature encoders to your micro metal gearmotors ( extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate...
₹ 989.00 *
19 From 66
Viewed