The D36V50Fx family of buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 50 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters), which...

This powerful synchronous switching step-down (or buck) regulator takes an input voltage from 4.5 V to 50 V and efficiently reduces it to 3.3 V . The board measures only 1″ × 1″ yet delivers typical maximum continuous output currents...

This current sensor is a carrier board or breakout board for Broadcom’s ACHS-7121/7122/7123/7124/7125 Hall effect-based linear current sensors; we therefore recommend careful reading of the ACHS-7121/7122/7123 datasheet (1MB pdf) or...

This is Pololu’s portion of Texas Instruments Robotics System Learning Kit (TI-RSLK) MAX , a simple to use solderless robotics kit that provides hands-on learning opportunities for first year engineers. A TI MSP432P401R LaunchPad (not...

This upgrade kit for the Romi/TI-RSLK MAX lets you add obstacle detection and ranging to your Romi/TI-RSLK MAX robot. It consists of three Sharp GP2Y0A21YK0F Analog Distance Sensors , which have a detection range of 4″ to 32″ (10 cm to...

This 12-inch (30-cm) cable has 26 AWG wires with a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors. The other ends of the wire are terminated with male pins for 0.1"...

The versatile Romi chassis is a great starting point for your next mobile robot. This kit includes all the basic mechanical parts to get up and running, including two motors, two wheels, one ball caster, and battery contacts. The wheels...

The versatile Romi chassis is a great starting point for your next mobile robot. This kit includes all the basic mechanical parts to get up and running, including two motors, two wheels, one ball caster, and battery contacts. All of the...

The versatile Romi chassis is a great starting point for your next mobile robot. This kit includes all the basic mechanical parts to get up and running, including two motors, two wheels, one ball caster, and battery contacts. The wheels...

This product consists of an item #1520 plastic gearmotor , which is the same gearmotor included with the Romi Chassis Kits , with a Romi encoder already installed. The encoder has 2mm-pitch male headers already soldered that allow it to...

These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connector housings on the ends. By combining these wires with our crimp connector housings , you can quickly and easily create custom...

These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connector housings on the ends. By combining these wires with our crimp connector housings , you can quickly and easily create custom...