Spare counter rotating propellers pack (4 x CCW + 4 x CW) Specifications Size: 45 mm Fits shaft: 0.8 mm Package content 4 x CW propeller 4 x CCW propeller

With the STEM ranging bundle you get everything you need for scripting and learning how to operate a robot in 3 dimensions and react to objects around it. We supply an easy to use Python API where you can use commands like "move forward...

New Version Bit 114992445 The AI-deck extends the computational capabilities and will enable complex artificial intelligence-based workloads to run onboard, with the possibility to achieve fully autonomous navigation capabilities. The...

240mAh LiPo battery features Operating Temperature: 0 ～35°C (Charging) / -20～60°C (Discharging) Connector: Molex 51005-2P (Pin 1 positive) Electrical specification Capacity: 240mAh Nominal voltage: 3.7 V (1 Cell) Discharge: 15C Charge:...

Super-spherical markers from Qualisys . The markers are high quality, threaded markers that can be used with the Motion capture marker deck , or stand alone. The markers are designed for maximum roundness and with their solid build, they...

The Lighthouse deck uses the HTC Vive base stations (aka Lighthouse) to achieve high precision positioning. The deck has 4 receivers which gives position and will in the future also give pose of the Crazyflie. The hardware supports both...

The Loco positioning Deck is a Tag in the Loco Positioning system and measures the distance to Anchors. The distances are used to estimate the absolute position of the Crazyflie 2.X in the room, which can be used for autonomous flight....

The Loco Positioning Node is a versatile positioning device that can run either as an Anchor or Tag in a Loco Positioning system. The system measures the distance between Nodes and Tags, and from those distances the absolute position of...

Test new hardware easily without soldering by using the breakout expansion board. Just build the circuit on a breadboard and attach the Crazyflie 2.X to it. The board has all the 20 expansion connector pins available as well as a...

One of our goals is to make development with the Crazyflie 2.X as easy as possible. Due to the small size of the platform there are limitations in what connectors we can have and therefore we designed a debug-adapter kit that makes...

Add a prototyping area to your Crazyflie 2.X and lift your electronics into the air. Just solder directly on the expansion board and plug it to the expansion port. For more information, see the Prototyping deck web page Features...

The Z-ranger deck v2 uses a laser sensor to measure the distance to the ground and adds the possibility to fly with precise height control. Using the ToF sensor VL53L1x the Crazyflie 2.X can measure the distance from the sensor to a...