Overview This compact sensor makes it possible to measure the distance of objects up to about 50 cm (20″) away using a simple digital pulse width interface (similar to a hobby servo control signal). It uses a short-range lidar module to...

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are two! The magic of the Doubler comes when stacking a Feather and another board on top of the...

Store your project safe and sound in this nice weatherproof box with a clear top. We picked up this box because we like the machinable ABS plastic body and tough clear polycarbonate cover, the built in weatherproof gasket seal, and the...

Dedicated Cooling Fan for Jetson Nano, 5V, 3PIN Reverse-proof Category: Jetson Nano cooling fan Connector: 3PIN reverse-proof connector Spec: 5V Dimensions: 40mm×40mm×10mm

Little clicky switches are standard input "buttons" on electronic projects. These are just like our Colorful Round Tactile Button Switch Assortment, but already assembled onto a PCB - they even have a pull-up resistor installed! The pins...

This is the FeatherWing Tripler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are three! The magic of the Tripler comes when you want to connect your Feather to two other...

The BT-100 is a wideband bias tee TX Power Amplifier (PA) that draws its current from the bladeRF 2.0 micro’s SMA connectors. The BT-100 is versatile PA that is an ideal intermediary or final stage amplifier in a TX chain. bladeRF-cli...

The BT-200 is a wideband bias-tee RX Low Noise Amplifier that draws its current from the bladeRF 2.0 micro’s SMA connectors. The BT-200 is a compact LNA solution useful for substantially lowering the noise figure and substantially...

This is a general purpose tri-band antenna that covers 700MHz to 2600MHz. It is a good fit as a starter antenna for research and experimentation in the ISM bands. Product includes: 1x Tri-Band Antenna Highlights: Type: Durable Rubber...

The case fits the bladeRF 2.0 micro. A set of screws are included for assembly. The enclosure is made of a high density yet clear PolyCarbonate material that can withstand a great amount of stress. Product includes: 1x bladeRF 2.0 micro...

The TinyFPGA BX is a small field-programmable gate array (FPGA) board with all of the components and circuitry required for the FPGA to function, provided for you in a single package. The BX module allows you to design and implement your...

This is a dual mode wireless NIC module applicable for Jetson Nano, supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2. Specification Chip: Intel 8265AC Bands: 2.4GHz / 5GHz Speed: 300Mbps / 867Mbps WiFi protocol: 802.11ac Bluetooth...