INTRODUCTION A miniature snap-action switch, also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.Micro switches are very widely used; among their applications are...

INTRODUCTION This is a soft thin protoboard with hole diameter of 1mm, hole spacing of 2.54mm. It can be soldered DIP and SMD components, and the thickness is only 0.4mm. The proto board can be appropriate bending in any direction...

INTRODUCTION This Bluetooth Audio receiver module includes a USB port and TF card slot. With a pre-amp output, you can drive headphones or a 3W speaker directly. You can also add an active power amplifier and connect a loudspeaker. The...

INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6mm diameter,...

INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6mm diameter,...

INTRODUCTION This is a transparent plastic Arduino case, which is specially designed for Arduino UNO R3 . It is made of ABS material, which has good strength and tenacity. We have reserved enough GPIOs slots on the case, makes it...

INTRODUCTION The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons (Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module (SKU:TEL0005) interface and the...

INTRODUCTION Wido is an Arduino compatible WIFI IoT Node development board, which integrates with WG1300 WIFI solution. The microcontroller of Wido is ATMEL ATmega32U4. Wido are compatible with copious amounts of Arduino and periphery...

Herkulex DRS-0101 is state of the art modular smart servos incorporating motor, gear reducer, control circuitry and communications capability in one single package, which can provide up to 12kg.cm at 7.4v. Equipped with a lot of adapting...

INTRODUCTION RLY-8-POE is a USB relay controller based on STM32. With this module users can be able to do remote control/switching power supply centralized management. You can control household appliances through USB wire and with 8...

INTRODUCTION The Expansion Shield X200 is a most cost-effective shield which could apply to Raspberry Pi Model B+ and Raspberry Pi 2 Model B . It integrates a lot of very useful functions such as RTC real time clock; audio input and...

INTRODUCTION Romeo for Intel® Edison is a multi-purpose, all-in-one development platform based on Intel Edison and Arduino SoC. It is especially designed to be useful for robotics applications. Romeo for Intel® Edison is compatible with...