The Pmod GYRO is a 3-axis gyroscope powered by the STMicroelectronics L3G4200D . By communicating with the chip through SPI or I 2 C, users may configure the module to report angular momentum at a resolution of up to 2000 dps at an...

The Pmod ENC features a rotary shaft encoder with an integral push-button to provide multiple types of outputs such as a way for users to quickly switch between multiple choices shown on a screen or predefined motor speeds. The module...

The Pmod DHB1 uses the Texas Instruments ® DRV8833 dual H-Bridge motor driver chip to drive two DC motors or a single stepper motor. Each H-Bridge can be driven by GPIO signals. Features: Dual H-Bridge capable of 1.5A RMS Two quadrature...

The Pmod DPOT is a digital potentiometer powered by the Analog Devices' AD5160. Users may set a desired resistance between 60Ω and 10kΩ by programming the chip through SPI. Features: Uses the Analog Devices AD5610 Digital potentiometer...

The Pmod DA2 is a 12-bit Digital-to-Analog converter powered by the Texas Instruments DAC121S101. As it is able to simultaneously convert two separate channels of digital information provided over an interface similar to SPI, users can...

The Pmod CDC1 is a capacitative sensor that uses the Analog Devices AD7156 . By communicating with the chip via I 2 C, users can set the Pmod for an adaptive capacitance threshold that changes with the environment or set static...

The Pmod BTN gives users four momentary pushbuttons for easy user inputs to a system board. Features: Four momentary pushbuttons Debouncing filters Inverting Schmitt Triggers Small PCB size for flexible designs 1.2“ × 0.8” (3.0 cm × 2.0...

The Pmod BT2 is a powerful peripheral module employing the Roving Networks ® RN-42 to create a fully integrated Bluetooth interface. Users can communicate with the chip via UART and can also use the secondary SPI header on the board for...

The Pmod AMP2 is a low power audio amplifier through the use of the Analog Devices SSM2377 . With digital gain options and a pop-and-click feature, users are able to drive a variety of monophonic outputs by providing a digital or analog...

The Digilent Pmod ALS demonstrates light-to-digital sensing through a single ambient light sensor. Digilent Engineers designed this Pmod around Texas Instrument's ADC081S021 analog-to-digital converter and Vishay Semiconductor's...

The Pmod AD2 is an analog-to-digital converter powered by the Analog Devices AD7991. Users may communicate with the board through I 2 C to configure up to 4 conversion channels at 12 bits of resolution. Features: Up to four 12-bit...

The Digilent Pmod AD1 is a two channel, 12-bit analog-to-digital converter that features Analog Devices AD7476A . With a sampling rate of up to 1 million samples per second, this Pmod is capable of excelling in even the most demanding...