Description Vibra Sense click is a low cost micro shock vibration sensor with a digital output which can be set as an Interrupt (mikroBUS INT pin) An onboard potentiometer lets you set the interrupt threshold. An additional Enable line...

REED click is a simple board that carries a standard (Single Pole Single Throw Normally Open) reed switch. A reed switch comprises of two thin magnetic contacts sealed inside a casing. One contact is a magnetic north pole, the other a...

Line Follower click carries an array of five QRE1113 miniature reflective object sensors. As the name implies, Line Follower click is best used for line following robots and cars. Each one of the QRE1113 sensors consist of an infrared...

9DOF click carries ST’s LSM9DS1 inertial measurement module that combines a 3D accelerometer, a 3D gyroscope and a 3D magnetometer into a single device outputting so called nine degrees of freedom data (3-axis acceleration, angular...

Color 2 click carries the ISL29125 RGB color light sensor. It detects red, green and blue in a variety of lighting conditions, outputting 16-bit resolution data in a measuring range from 5.7 m lux to 10,000 lux. Both the range and output...

Weather click carries BME280 integrated environmental unit from Bosch. It’s a sensor that detects humidity, pressure, and temperature, specifically designed for low current consumption and long-term stability. The click is designed to...

DAC2 click carries LTC2601CDD , a 16-bit digital-to-analog converter, along with voltage output screw terminals. The chip has high rail-to-rail output drives (±15mA, Min) and double-buffered data latches. The click board communicates...

6DOF IMU click carries ST’s LSM6DS33TR 6-axis inertial measurement unit comprising a 3-axis gyroscope and a 3-axis accelerometer. The chip is a highly accurate 6 DOF inertial measurement unit with long-term stable operation over a wide...

How It Works. The proto Bit is what littleBits engineers use to build and prototype new Bits. Hack into existing Bits, or invent a brand-new one by connecting to printed circuit boards or solderless breadboards. With the proto Bit, you...

The split lets you connect a single Bit to 2 others. If you place an input before the split, it will control the 2 outputs at once, like a single light sensor controlling 2 motors (to spin car wheels!). The flexible wires on the split...

The USB I/O module allows you send and receive digital audio and control voltages to and from a computer. When using in conjunction with a DAW, you can record your Synth Kit directly into a computer without the need of an external audio...

The wire Bit has a flexible wire running between its 2 bitSnaps. This allows you to place your Bits farther apart from each other, turn corners, and make connections that can twist, turn, and spin. Try it whenever you need to break up...