Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
 
48 From 632
No results were found for the filter!
LoCoBot PX100
LoCoBot PX100
The LoCoBot is an ROS research rover for mapping, navigation and manipulation (optional) that enables researchers, educators and students alike to focus on high level code development instead of hardware and building out lower level...
₹ 4,37,119.00 *
Dagu Wild Thumper 4WD All-Terrain Chassis, Black, 75:1
Dagu Wild Thumper 4WD All-Terrain Chassis,...
This rugged, 4-wheel-drive chassis from Dagu Electronics is a smaller version of the Wild Thumper 6WD chassis . It is designed to excel at traversing rough terrain, making it a great platform for any robot that needs to perform tasks in...
₹ 28,499.00 *
Tsunami Super WAV Trigger (Qwiic)
Tsunami Super WAV Trigger (Qwiic)
Based on a new generation ARM Cortex M7, the Qwiic Tsunami Super WAV Trigger extends polyphony to 32 mono or 18 stereo simultaneous uncompressed 44.1kHz, 16-bit tracks. Each track can start, pause, resume, loop and stop independently,...
₹ 9,449.00 *
Waterproof DS18B20 Digital Temperature Sensor for Arduino
Waterproof DS18B20 Digital Temperature Sensor...
This is a waterproofed version of the DS18B20 Temperature sensor . Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it...
₹ 689.00 *
Male deck connector
Male deck connector
This product is intended to be used together with the Crazyflie 2.X expansion deck system. Package contents 4 x short male expansion pin-header (top 9mm long) 4 x medium male expansion pin-header (top 15mm long) Resources Datasheet
₹ 279.00 *
7 mm DC-motor
7 mm DC-motor
Spare Crazyflie 2.X brushed coreless DC-motor. Mechanical specifications: Diameter: 7.0 mm Length: 16.0 mm Shaft length: 3.5 mm Shaft diameter: 0.8 mm Weight: 2.7 g Wire length: 32.0 mm Molex Picoblade 2P connector Electrical...
₹ 439.00 *
Battery holder deck
Battery holder deck
Spare battery holder deck for Crazyflie 2.X. Mechanical specifications: Weight: 0.4g Size (WxHxD): 28x28x4mm Package contents: 1 x Battery holder deck Ressources: Datasheet
₹ 609.00 *
500mA LiPo USB charger
500mA LiPo USB charger
Use the Bitcraze battery charger to always have your spare batteries full to maximize your flight time. If you’re a bit handy with a soldering iron you can even solder multiple chargers together for multi-battery charging. For more...
₹ 659.00 *
250mAh LiPo battery
250mAh LiPo battery
Make sure to get the maximum amount of flight-time from your Crazyflie 2.X using this spare battery. Features: Operating Temperature: 0~45°C (Charging) / 0~60°C (Discharging) Connector: Molex 51005-2P (Pin 1 positive) Package Contents: 1...
₹ 719.00 *
Getting started bundle - Crazyflie 2.1+
Getting started bundle - Crazyflie 2.1+
The "Getting started bundle" has everything you need to dive into the Crazyflie platform to start exploring flying robotics. Aside from the Crazyflie 2.1+ this bundle also includes the Crazyradio, which enabled connection to a computer...
₹ 29,749.00 *
AI-deck monocrome camera module
AI-deck monocrome camera module
This is a monochrome camera module to exchange the color camera module (Bayer RGB) for, which comes with the AI-deck . This is handy if you rather work with greayscale images. The Bayer RGB can be converted to gray-scale as well but then...
₹ 2,309.00 *
micro-USB cable (48cm)
micro-USB cable (48cm)
Standard micro USB cable. Features: USB A male connector USB Micro B male connector 48cm in length (~19 inches)
₹ 609.00 *
48 From 632
Viewed