Top seller
No results were found for the filter!
Standard Gripper Kit B - Straight Mount This is the Standard Gripper Kit B, a simple and durable robotics kit that is great for “getting a grip” on pretty much any robotics project! Designed for use with any standard size Hitec or Futaba servo, the gripper kit is easy to...
₹ 1,059.00 *
Fingerprint Scanner - 5V TTL (GT-511C1R) Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they’re usually unreliable or difficult to implement. Well not anymore! We’ve found this great fingerprint module from...
₹ 3,949.00 *
900MHz Duck Antenna RP-SMA 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. The FCC is moving towards Part 15 compliance. All this means is that all the SMA RF connectors are...
₹ 799.00 *
Hakko FX888D Soldering Station For over 50 years, Hakko has been producing superior quality soldering and desoldering tools. They’re dependable, a good value and they work really well! We use Hakko irons in production and we think they’re great. The Hakko FX-888D is...
₹ 18,369.00 *
Soldering Tip - Hakko - 3mm Bevel (T18-C3) This is a replacement soldering tip for our Hakko FX-888 soldering iron. This is a bevel type of soldering tip. Replacing the tip is very easy - simply unscrew the shield, slip the replacement tip in, and screw the shield back on.
₹ 749.00 *
NB-IoT HAT for Raspberry Pi, for Europe, Asia,... This is an NB-IoT (NarrowBand-Internet of Things) HAT for Raspberry Pi, controlled via serial AT commands, supports communication protocols like LWM2M/COAP/MQTT, etc. Due to the advantages of low delay, low power, low cost, and wide...
₹ 1,979.00 *
Rotary Potentiometer - Linear (10k ohm) An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending...
₹ 89.00 *
EL Wire - Red 3m EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors and can be driven pretty easily...
₹ 989.00 *
EL Wire - Blue 3m EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors (check below for other colors) and...
₹ 989.00 *
VoiceBox Shield The SparkFun VoiceBox Shield can be mounted on top of your Arduino board to give it access to all of the capabilities of the SpeakJet voice and sound synthesizer. The Voice Box Shield uses the SpeakJet chip to convert serial commands...
₹ 4,229.00 *
SparkFun Sensor Pack for Intel® Edison The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength...
₹ 6,519.00 *
Rotary Potentiometer - 10k Ohm, Linear An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending...
₹ 89.00 *
reComputer J202 DRS - 0101 Flexiforce One Channel H-Flow Optical Atlas Triple Output H3LIS331DL Vibration Motor M1 RFID Card Holybro BLHeli mikroPascal PRO Hall Current 3 Gravity 4Pin 0.95inch RGB Power Micro Load Cell Atlas Nvidia Jetson UFactory xArm 6 OAK-D Pro Auto High-Power Raspberry Pi Plug Sense Ettus USRP N210 NVIDIA Jetson IoT Long Range Easy8051 v6 Atlas SiK Telemetry WidowX 250 TV-B-Gone Kit - 1W-TH-IB 1-Wire Arty S7-25T JTAG-HS3 LoCoBot WX250 Cmod A7-15T Arduino Ettus USRP PCA9685 Arty A7-100T NI Multisim RFID Receiver 5 1 DOF Crazyradio 2.0 Atlas
Viewed