Features 13.3inch IPS screen,1920x1080 hardware resolution Toughened glass capacitive touch panel, 6H hardness Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers When works with Raspberry Pi,...

Today, the grove series of sensors, actuators, and displays have grown into a large family. More and more grove modules will join the whole Grove ecosystem in the future. We see the Grove helps hundreds of thousands of makers, engineers,...

1024×600, 7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems 7inch HDMI LCD (C) Features 7inch IPS screen, 1024x600 hardware resolution Capacitive touch control Supports popular mini PCs such as Raspberry Pi, BB...

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA. It is...

This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power...

The Grove - Flame Sensor can be used to detect fire source or other light sources of the wavelength in the range of 760nm - 1100 nm. It is based on the YG1006 sensor which is a high speed and high sensitive NPN silicon phototransistor....

Pack list: 1X Barrel jack adaptor-screw terminal to 2.1mm male 1X Barrel jack adaptor-screw pluggable terminal to 2.1mm male 1X Barrel jack to screw terminal converter 1X BNC adaptor female to screw terminal 1X DC jack to JST 2pin...

This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applications and can be used...

Have you ever used one of those noncontact temp guns? This is the newest and smallest version that sensor. Point the MLX90632 at an object and remotely get its temperature within 1 degree C. This is a fun little sensor to play with! The...

This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent...

Wifi shield ?Fi250?is a economic internet solution with Arduino. The Wi-Fi module support IEEE 802.11b/g/n mode, maximum speed up to 65Mbit/s. Wifi shield (Fi250) combine on board antenna; it’s easy to build you project in a small box....

Short for Near Field Communication, NFC is a widely used technology around us. It's behind daily applications such as access control system and mobile payment system. NFC Shield features a highly integrated transceiver module PN532 which...