This Mini ORP Probe can be fully submerged in fresh water or salt water, up to the SMA connector indefinitely. Reads ORP Range +/- 2000mV Accuracy +/– 1mV Connector Female SMA Response time 95% in 1s Max pressure 100 PSI Max depth 60m...

If you are new to electrochemical sensing, knowing what components you need can get confusing. Let us help you. The Atlas Scientific K10 EZO- Conductivity Kit is perfect measuring water with a conductivity range from 70µs to 500,000+µs....

If you are new to electrochemical sensing, knowing what components you need can get confusing. Let us help you. The Atlas Scientific K0.1 EZO- Conductivity Kit is perfect measuring water with a conductivity range from 0.07µs to 50,000µs....

• ORP Probe Storage Solution • 125ml (4oz) • 2 year shelf life at room temperature

High accuracy sensors require high accuracy calibration solutions. Atlas Scientific conductivity calibration solutions are made using a six-stage process to ensure the highest accuracy. If you need a certificate on analysis, just email...

As a Dissolved Oxygen probe ages, its output signal starts to get weaker. Eventually, you will start to see that the readings are lower than normal. This usually means that it’s time to replace the probes electrolyte solution. Where...

This product is used to replace the PTFE sensing membrane for the Lab Grade Dissolved Oxygen probes. Specifications: • 2x Lab Grade Dissolved Oxygen probe replacement membranes. This product is used to replace the PTFE sensing membrane...

High accuracy sensors require high accuracy calibration solutions. Atlas Scientific conductivity calibration solutions are made using a six-stage process to ensure the highest accuracy. If you need a certificate on analysis, just email...

This ORP Probe can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely. Reads ORP Range +/- 2000mV Accuracy +/– 1mV Connector Male BNC Response time 95% in 1s Max pressure 100 PSI Max depth 60m (197 ft)...

Atlas Scientific Zero Dissolved Oxygen Calibration Solution is guaranteed not to have any oxygen in it. This stuff is great for calibrating the low end of the Dissolved Oxygen scale or to confirm that your Dissolved Oxygen probe is...

• 125mL • 225 ±2.0mV at 25°C • Good for 30 days after opening • Keep refrigerated for longer life

Reads ORP Range -1019.9mV − 1019.9mV Accuracy +/– 1mV Response time 1 reading per sec Supported probes Any type & brand Calibration Single point Temp. compensation N/A Data protocol UART & I2C Default I2C address 98 (0x62) Operating...