Water Flow Medium, FS300A: Flow rate: 1 ~ 60 L/Min Working voltage: +5 V ~ +24 V (not suitable for +3.3 V) Working temperature: 0 ºC ~ 80 ºC Pipe connection: 3/4’’ Accuracy: ±3% Max rated current: 15 mA (DC 5 V)

To provide access to the 4-20 mA current loop board signals on the Waspmote Plug & Sense! encapsulated line, a waterproof terminal block junction box is available as a probe, making the connections on industrial environments or outdoor...

This model has been created as an evolution of Smart Environment. It enables the user to implement pollution, air quality, industrial, environmental or farming projects with high requirements in terms of high accuracy, reliability, and...

Features Pre-Assembled Female BNC Connector Low profile Gold plated Brass Includes washer and nut Designed for RF applications Right angle 50ohm impedance Designed to be easily connected into a breadboard for rapid development.

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 12 V . The board measures only 0.7″ × 0.8″ yet delivers typical maximum continuous output currents between...

This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). This hybrid bipolar stepping motor has a 1.8° step...

The Tic T249 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C,...

Features For Industrial K 1.0 Calibration 125ml (4oz) Standardized against NIST-certified references 2 year shelf life at room temperature This set includes 1 (1,413µS) and 1 (12,880µS)

This powerful step-up/step-down regulator efficiently produces a fixed 24 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and...

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 5 V . The board measures only 0.7″ × 0.8″ yet delivers typical maximum continuous output currents between...

This small synchronous switching step-down (or buck) regulator takes an input voltage from 4.5 V to 50 V and efficiently reduces it to 3.3 V . The board measures only 0.7″ × 0.8″ yet delivers typical maximum continuous output currents...

The CAN Bus module has been tested with various devices and cars, and is compatible with the majority of commercial modules, but this does not ensure the working with all of them. Be sure that the CAN Bus module fits your technical...