Specification: Lens Color: Clear Emitted Color: Gold Yellow Wavelength: 585nm-595nm Power: 1W-3W Forward Voltage: 2.0V-2.4V Forward Current: 400mA-750mA(when run on 400mA it is 1W, when run on 750mA it is 3W) Luminous Flux: 70 lumens LED...

50 Pieces Electret Microphone Model: HM4522P-423-G Environmental noise: 36(Maximum) Operation voltage range: 1~10V DC Rated current: Sensitivity: 52db Size: 4.5 x 2.2mm (diameter x height)

Witty is the latest version of the all-in-one development board for the hugely popular WiFi IoT chip from Espressif, the ESP8266. The main PCB on top consists of an ESP-12F module along with an RGB LED, an LDR, a user push button and USB...

Feature: Diameter:9.7mm Height:6.7mm Medium Electret Microphone Pin number:2

TGS 822 - for the detection of Organic Solvent Vapors The sensing element of Figaro gas sensors is a tin dioxide (SnO2) semiconductor which has low conductivity in clean air. In the presence of a detectable gas, the sensor's conductivity...

Ideal when replacing components or stripping down your PC, Laptop, anti-static shielding ziplock / gripseal bags providing protection against ESD. Suitable for storing electronic products which are sensitive to static, e.g. PCBs, IC...

Kingbright SMT Subminiature Package The KM2520 range of solid state lamps, from Kingbright, come in a subminiature surface mount package. These subminiature LEDs offer long life with solid state reliability. The KM2520 subminiature...

The INA118 is a low-power, general-purpose instrumentation amplifier offering excellent accuracy. The device’s versatile, 3-op amp design and small size make it ideal for a wide range of applications. Current-feedback input circuitry...

Connect your own PCB to a Raspberry Pi B+ with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with our...

This pack of female headers includes two 6-pin headers and two 8-pin headers. This is similar to the header kit that comes with Arduino shields except that the pins are shorter so they don’t stack. These are useful for Arduino compatible...

This kit is desigened specially for https://www.coursera.org/learn/developer-iot What's included - 1. Raspberry Pi 3 2. Raspberry Pi Sense HAT 3. 16 GB Class 10 NOOBS SD Card 4. Power Supply - 5V 2.1A 5. Raspberry Pi case 6. HDMI cable...

Use heat shrink to reinforce connections, protect devices, and electrically isolate exposed electronics. Generally used to bundle wires and very commonly used to seal electrical joints and prevent wire joints from corrosion & abrasion....