Top seller
No results were found for the filter!
ODYSSEY - X86J4105800 Most expandable Win10... ODYSSEY - X86J4105 redefines the SBC (Single Board Computer) with Arduino Coprocessor onboard, enabling IoT (Internet of Things) easier than before. Key Feature Intel® Celeron® J4105 , Quad-Core 1.5-2.5GHZ Dual-Band Frequency 2.5GHz/5GHz...
₹ 20,659.00 *
Wio Terminal: ATSAMD51 Core with Realtek... Compatible with Arduino and MicroPython, Wio Terminal is an ATSAMD51-based microcontroller with wireless connectivity supported by Realtek RTL8720DN. Its CPU speed runs at 120MHz (Boost up to 200MHz). Realtek RTL8720DN chip supports both...
₹ 3,289.00 *
Seeeduino XIAO - Arduino Microcontroller -... Seeeduino XIAO is the smallest Arduino compatible board in Seeeduino Family. It is an Arduino microcontroller that is embedded with the SAMD21 microchip. The interfaces of Seeeduino XIAO is rich enough in such a tiny Dev. Board as well....
₹ 829.00 *
Universal IP67 Case No drills, all thrills. The Universal IP67 Case is Pycom’s very own universal waterproof case, with push-in tabs that fit accessory sensors perfectly, creating a water tight seal. Two holes go straight through the case without...
₹ 2,399.00 *
IP67 Antenna Cable IP67 antenna cable to help waterproof your outdoor IoT applications. Use with Sigfox/LoRa/External WiFi Antenna sold on this site. Includes nut, washer and rubber ring. Perfect for use with IP67 cases Product Performance: 50R Impedance...
₹ 639.00 *
External WiFi Antenna External WiFi Antenna and cable (non IP67). Includes Antenna, cable, washer and nut. Frequency Range: 2.4 2.5GHz VSWR: 2.0MAX Cable length: 10mm
₹ 1,279.00 *
Pycase Blue Pycase Blue is a neat case developed specifically for a Pycom development board and expansion board combo. Holds Development Board, Expansion Board, Antenna and there’s even room for a small battery. The Pycase is compatible with LoPy,...
₹ 1,279.00 *
LTE-M Antenna Kit External LTE-M Antenna Kit for use with the FiPy and GPy development boards. Specification Frequency: 703~803/2520~2620(MHz) Antenna size: 75 x 21 (mm) PCB 0.6 mm LTE Low bands (5, 8, 12, 13, 18, 19, 20, 28) Tx frequencies 699 to 915 MHz...
₹ 1,439.00 *
Pycase Clear Pycase Clear is a small, completely transparent case developed specifically for a Pycom development board and expansion board combo. Holds Development Board, Expansion Board, Antenna and there’s even room for a small battery. The Pycase...
₹ 1,279.00 *
IP67 Case for Pysense/Pytrack This is the IP67 case for Pysense and Pytrack. Space available for Pycom module (whether you are using a WiPy 2.0, LoPy, SiPy, GPy or FiPy), Pycom shield (Pysense or Pytrack) and a LiPo battery. Waterproofing by using silicone gasket. UV...
₹ 2,079.00 *
WiPy 3.0 Multipack The WiPy Multipack of 1, 2 or 5 development boards that let’s you add sensor shields and antennas in a bundle. The WiPy 3.0 is a tiny MicroPython enabled WiFi and Bluetooth IoT development platform. With 1KM WiFi range, state of the art...
From ₹ 6,609.00 *
LoPy4 Multipack The LoPy4 Multipack Bundle features the LoPy4, the only 4-network (WiFi, BLE, LoRa, and Sigfox) and MicroPython combination controller on the market today the perfect enterprise grade IoT platform for your connected Things. With the...
From ₹ 9,029.00 *
5 1 DOF SparkFun Touch AC Current I2C Isolator 2 LLC SPI Click UniPi 1.1 Lite ETH Click RS232 Isolator USB UART 2 DALI 2 click 5 1 DOF Accel 7 click Pololu 5V 5A LoPy4 H-Flow Optical Kria KR260 Ettus USRP B200 CT220BMV-HS5 2GB industrial ATA6570 click EERAM 3.3V 172 1 Metal Pololu Voltmeter click General Driver RS485 click 5V LLC-I2C Click Industrial SparkFun MP3 mikroPascal PRO Direct Wired DALI Click NVIDIA Jetson 12-Channel Pixhawk 6C Light Temp Cora Z7-07S Methane CH4 and NFC click NI myRIO RS485 2 click Cmod S7 Analog MaxBotix MB1340 8-Channel I2C CT220RMV-HS5
Viewed