Products from Emlid
No results were found for the filter!
Navio2 Board Autopilot HAT for Raspberry Pi powered by ArduPilot and ROS — Navio2 — Connector for RPi — 4x spacers — 8x M2.5 screws Turn your Raspberry Pi® into a drone controller GNSS receiver Tracks GPS, GLONASS, Beidou, Galileo and SBAS...
₹ 21,669.00 *
Reach RS+ RTK GNSS receiver with an app as a controller Centimeter accuracy for surveying, mapping and data collection. GNSS GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS Long range radio LoRa 868/915 MHz, range up to 8 km 30 hours battery life...
₹ 1,03,069.00 *
Reach RS+ Cable 2M With DB9 Female Connector Reach RS+ Cable 2M With DB9 Female Connector Compatible with the original Reach RS.
₹ 4,899.00 *
Reach RS+ Cable 2M w/o 2nd Connector Reach RS+ Cable 2M w/o 2nd Connector Compatible with the original Reach RS.
₹ 3,999.00 *
Reach RS+ Cable 2M With DB9 Male Connector Reach RS+ Cable 2M With DB9 Male Connector Compatible with the original Reach RS.
₹ 4,899.00 *
Reach M+ Antenna Extention Cable 2M Reach M+ Antenna Extention Cable 2M Compatible with the original Reach module.
₹ 1,549.00 *
Reach M+ TNC Antenna Adapter Cable 2M Reach M+ TNC Antenna Adapter Cable 2M Compatible with the original Reach module.
₹ 1,809.00 *
Tallysman Multi-GNSS Antenna Tallysman TW4721 is a compact, wideband Accutenna™ technology GNSS antenna that provides accurate reception for all upper L- band GPS, GLONASS, Beidou, and Galileo signals (L1, G1, B1, B1 BOC, B12, E1) and associated augmentation signals...
₹ 7,739.00 *
Navio2 GPS/GNSS Antenna MCX This antenna is not compatible with NEO6-T USB dongle. Antenna type: active (LNA built-in) Supported navigation satellite systems: GPS, GLONASS Dimensions: 45 x 35 x 15 mm Cable length: 300 mm Connector type: MCX Mounting: adhesive...
₹ 1,549.00 *
Power Module For Navio2 Supports LiPo batteries up to 6S Max current sensing: 60 A* Switching regulator output: 5.3 V 2.25 A 6-pos DF13 cable for connection to Navio2 power port *power module can sense current up to 90A if different connectors are used (XT60...
₹ 2,069.00 *
Wire Pack For Navio2 Includes : 2xDF13 6-pin to 2.54 mm female jumpers for UART and ADC ports 1xDF13 4-pin to 2.54 mm female jumpers for I2C port Wire length: 200 mm.
₹ 1,159.00 *
Ammonia NH3 Gas High Power Raspberry Pi Ultrasound LoCoBot WX250 MCP2518FD click I2C Shield for Fermion MEMS BNC Adapter TurtleBot4 Clicker 2 for Industrial ReSpeaker Core XL330-M288-T 6DOF IMU 4 LED SMD RGB Flash 2 click 3G SARA click Ambient 3 Click AT 12A UNI-DS V8 Pimoroni pHAT Electret RS485 click Slider 2 Click NVIDIA Jetson Propeller Guard OpenRB-150 Arduino Due - NVIDIA Jetson OpenCR1.0 Solid State Buck 10 Click Pololu Simple WiFi Relay Air quality 5.65inch ACeP Opto 3 click BLE TX Click Hydrogen SiK Telemetry Carbon Dioxide RS232 485 422 Temp Hum 9 ST-LINK V2 mini AT 55A
Viewed