Products from Bitcraze

Make sure to get the maximum amount of flight-time from your Crazyflie 2.X using this spare battery. Features: Operating Temperature: 0~45°C (Charging) / 0~60°C (Discharging) Connector: Molex 51005-2P (Pin 1 positive) Package Contents: 1...

Use the Bitcraze battery charger to always have your spare batteries full to maximize your flight time. If you’re a bit handy with a soldering iron you can even solder multiple chargers together for multi-battery charging. For more...

The "Getting started bundle" has everything you need to dive into the Crazyflie platform to start exploring flying robotics. Aside from the Crazyflie 2.1+ this bundle also includes the Crazyradio, which enabled connection to a computer...

This is a monochrome camera module to exchange the color camera module (Bayer RGB) for, which comes with the AI-deck . This is handy if you rather work with greayscale images. The Bayer RGB can be converted to gray-scale as well but then...

Standard micro USB cable. Features: USB A male connector USB Micro B male connector 48cm in length (~19 inches)

Spare 6x15 mm brushed coreless DC motor for the Crazyflie Nano Quadcopter (Crazyflie 1.0). Electrical specifications: Kv: 12000 rpm/V Rated voltage: 4.2 V Rated current: 810 mA Mechanical specifications: Diameter: 6 mm Length: 15 mm...

Spare motor mount for the Crazyflie Nano Quadcopter. Specifications: Weight: ~0.21g Plastic: PP Package Contents: 4 x Motor mount Resources: Datasheet

With the Lighthouse explorer bundle you'll get everything you need to try out the Lighthouse positioning system . The system is used for on-board positioning, which gives a tracking volume of up to 5x5x2 meters with sub-millimetre jitter...

This product is a spare part for the Crazyflie 2.X and is intended to fit the Crazyflie 2.X - Spare 7x16 mm coreless DC motor. Package contents: 4 x 7mm motor mounts Resources: Datasheet

Pack of 4 spare brushed coreless DC-motors for Crazyflie 2.X. Mechanical specifications: Diameter: 7.0 mm Length: 16.0 mm Shaft length: 3.5 mm Shaft diameter: 0.8 mm Weight: 2.7 g Wire length: 32.0 mm Molex picoblade 2P connector...

With the swarm bundle you will get your very own swarm of Crazyflies! The bundle contains the LPS system configuration which supports TDoA where a virtually infinite amount of Crazyflies can be positioned simultaneously. It also contains...

Super-edge-computing on a 30 gram flying platform is now available! Thanks to the GAP8 IoT application processor from GreenWaves Technologies and the ULP camera, the Crazyflie is able to capture, analyze and classify its environment, as...