Click on Software link below to download the RoboPlus Design software to see the 3D assembly manual.

Features This charger is intended for the Li-Po battery. Uses the SMPS for power when charging, thus it must be accompanied with the SMPS 12V 5A. Support 2S and 3S Cell charge. (Exception, does not charge simultaneously) Package...

Features This is the RS-485 communication 4P cable set for Dynamixel X-series. New style JST connector is applied on one side of the cable while old style Molex connector is applied on the other side. This cable is used when connecting...

Features 5P cable set for connecting sensor/motor. Used to connect sensors to the GP I / O port of the controller. Easy to use for those who want to attach a sensor to a big robot. Package Contents 5P Cable 400mm 4 Compatible Products...

Features 5P Cable set for connecting Sensor/Motor. Used for connecting sensors with GP I/O port Package Components 5P Cable 150mm 4 Compatible Products Controller : CM-100, CM-150, CM-200, CM-510, CM-530, CM-700, OPEN CM-90.4 Sensor : IR...

Features This is the communication 4P cable for DX/RX/EX-Series, MX-Series, PRO-Series, RS-485. Flexible sheath resists against breaking and peeling of the cable. High pull out force of the connector maintains stable connection. The...

Features Used for 3P-5P conversion Used to connect sensors to the GP I / O port of the controller. Package Components 3P-5P Cable 150mm 5 Compatible Products Controller : CM-510, CM-530, CM-700 Sensor : Gyro Sensor GS-12, DMS Sensor DMS-80

Features Exclusive 3P cable for the USB Downloader LN-101. Can be used for replacement if the cable included in the USB Downloader LN-101 is damaged. Package Components LN-101 3P Cable 110cm 4 Compatible Products USB Downloader LN-101

Features 2 way 2 pin cable used for Battery Box ABB-020. Can be used for replacement if the cable included in the battery box is damaged. Package Components 2P Cable 150mm for battery box 4 Compatible Products Controller : CM-100,...

Features 2 way 2 pin cable used for the Geared Motor. Can be used for replacement if the cable included in the Geared Motor is damaged. Package Components 2P Cable 150mm for Geared Motor 4 Compatible Products Controller : CM-100,...

Features Connector Set used for OpenCM9.04-A. Users can solder the desired part on the controller. Package Components 1x20 PIN Header Socket(Pitch 2.54mm) 2 1x20 BOX Header Socket(Pitch 2.54mm) 2 2x5 PIN Header Socket(Pitch 2mm) 2 1x4...

Features This gear set is for Dynamixel MX-28. Made with metal and specially coated to strengthen endurance and durability of abrasion. A MX-28 exclusive magnet is attached to the wheel gear. There are 2 wheel bearings included. Package...