Please inform me as soon as the product is available again.
₹ 6,709.00 *
Prices incl. GST
Out of Stock.
- Product Code: ROBT-903-0210-000
- MPN: 903-0210-000
Features PCM is incorporated to protect the battery from overcharge, discharge, and...more
Product information "LIPO Battery 11.1V 1800mAh LB-012"
Features
- PCM is incorporated to protect the battery from overcharge, discharge, and excessive current.
- Lithium Polymer rechargeable battery for the ROBOTIS OP series.
- Cannot be used for PREMIUM/GP because the connector and size differs.
- Can be recharged with LBC-010 Battery Charger.
H/W Specifications
Weight | 106g |
---|---|
Size | 88mm x 35mm x 26mm |
Voltage | 11.1V |
Capacity | 1800mAh |
Discharge Rate | 5C |
Etc. | PCM built-in (overcharge, discharge, excessive current protection) |
Compatible Products
- Product : DARwIn-OP, ROBOTIS OP2, ROBOTIS OP3, TurtleBot3, OpenCR
- Charger : LIPO Battery Charger LBC-010
*NOT compatible with other CM-series controllers.
Storage Precautions
- Do NOT charge the battery when the battery is connected to the robot
- When storing away the battery for a long time, make sure the battery life is somewhere around 50%.
- Do not store it in wet or hot places.
※ The warranty for the LIPO 11.1V 1800mAh LB-12 is 6 months.
Caution
- Do not drop or fold parts of the battery or its parts.
- Do not use the product when charging.
- Do not apply heat, water or any other liquid on the battery.
- Do not place in the microwave, washing machine or dryer.
- Do not use damaged batteries. (inflated,deformed, damaged, etc)
- Do not short circuit the polarity.
- Do not take the battery apart.
- When charging, make sure the battery is connected into the correct polarity.
- Do not charge when the battery is hot. Please charge after it has cooled off.
- When the battery is not being used or fully charged, please do not have it connected to a controller.
- Do NOT charge the battery when the battery is connected to the controller.
Related links to "LIPO Battery 11.1V 1800mAh LB-012"
Viewed