Lipo Rider is a power module with Lipo battery charge management and boost circuit designed for MCU projects with standard USB output interface. It is extremely affordable and easy to use. No programming is required. Plug it in and it...

Grove - LED String Light is a LED Driver.work voltage of module is 5V/3V3,But String light is working on 12V,so this module is base on AIC1896, which is a current mode step up DC/DC Converter. Grove - LED String Light is equipped a 5M...

Seeeduino LoRaWAN W/GPS is an Arduino development board with LoRaWan protocol and GPS function embeded, through which you can get started quickly to experience LoRa's advantage in the field of IoT. Based on communication module...

The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we...

Click here to buy Hardware Development Kit (HDK) for Arduino Leonardo. This Hardware Development Kit (HDK) for Arduino Uno is your easiest way to get started designing an Arduino Uno project. The guidelines give you the drawings of...

Wire strippers used for stripping and cutting the most commonly used stranded and single wire gauges 20 to 30 AWG and 2-3 mm fiber jackets. Features Cuts, strips, loops, bends, and gauges solid and stranded wire Strips 20-30 AWG...

Mega Shield is a extension board for Arduino Mega and Google ADK. We have standardized all the connectors into 4 pins(Signal 1,Singal 2,VCC and GND) 2mm connectors and keep some of the 3pin(Signal, VCC and GND ) 2.54mm headers for Servo...

The 80cm Infrared Proximity Sensor is a General Purpose Type Distance Measuring Sensors, this sensor takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80cm (30"). Can be used in...

The Grove 6 – Axis Accelerometer&Compass v2 has 3 magnetic field channels and 3 acceleration channels, and 16-bit data output. It can be used easy with micro controller via I2C or SPI port. This sensor can be configured to generate an...

The Grove-125KHz RFID Reader is a module used to read uem4100 RFID card information with two output formats: Uart and Wiegand. It has a sensitivity with maximum 7cm sensing distance. Features Selectable output format: Uart or Wiegand....

If you have experience using Seeed’s Seeeduino board plus a base shield, you would know how easy it is because there is no jumper wire and soldering. In order to make it more convenient, we created the Seeeduino Lotus V1.0, a 2 in 1...

The Electricity sensor module is based on the TA12-200 current transformer which can change large alternating current into a small amplitude. You can use it to test large alternating current upto 5A. Features Grove compatible interface...