Close filters
 
  •  
from to
5 From 9
No results were found for the filter!
PhidgetSpatial 3/3/3 Basic
PhidgetSpatial 3/3/3 Basic
This spatial board has a 3-axis accelerometer, gyroscope and compass and connects to your computer via USB. The PhidgetSpatial 3/3/3 combines the functionality of a 3-axis compass, a 3-axis gyroscope, and a 3-axis accelerometer all in...
₹ 7,689.00 *
PhidgetSpatial Precision 3/3/3 High Resolution
PhidgetSpatial Precision 3/3/3 High Resolution
Note: The 1044_1B uses a different chipset as the 1044_0B, so performance may vary slightly. The PhidgetSpatial Precision 3/3/3 combines the functionality of a 3-axis compass, a 3-axis gyroscope, and a 3-axis accelerometer all in one...
₹ 13,189.00 *
PhidgetTemperatureSensor 1-Input
PhidgetTemperatureSensor 1-Input
Connect a thermocouple to this board to measure the temperature of an object or area. Plugs directly into a USB port. Thermocouples are widely used to measure extreme temperatures impossible to measure with other types of sensors. J, K,...
₹ 6,039.00 *
Stepper Phidget
Stepper Phidget
Control the position, velocity, and acceleration of a stepper motor from your VINT port with this powerful controller. Get moving with this powerful Bipolar Stepper Phidget. With a maximum power supply of 30V, it can provide up to 4A of...
₹ 8,239.00 *
PhidgetInterfaceKit 0/0/8
PhidgetInterfaceKit 0/0/8
Control 8 DPDT mechanical relays, switching up to 250VAC/2amp or 200VDC/2amp. The PhidgetInterfaceKit 0/0/8 provides small signal relays with 8 relay outputs, rated at a combination of 250VAC, or 2 Amps, up to a maximum of 60 Watts....
₹ 11,549.00 *
PhidgetInterfaceKit 0/16/16
PhidgetInterfaceKit 0/16/16
Replaced by 1012_3 Use it to check the state of switches and push buttons, and/or to switch relays, solenoids, and LEDs. Digital Inputs The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range: 4...
₹ 10,929.00 *
Phidget Interface Kit 0/0/4
Phidget Interface Kit 0/0/4
This board has 4 SPDT mechanical relays rated at 210W for DC or 1750VA for AC. The PhidgetInterfaceKit 0/0/4 allows you to control high power devices such as incandescent light bulbs, fans, and pumps by electronically switching power on...
₹ 6,329.00 *
PhidgetInterfaceKit 8/8/8
PhidgetInterfaceKit 8/8/8 - 2B
The Phidgets workhorse. Connect sensors, control outputs, and read in digital inputs. Analog Inputs The analog inputs are used to measure continuous voltage outputs generated by various sensors such as temperature, humidity, position, or...
₹ 9,209.00 *
PhidgetRFID Read-Write
PhidgetRFID Read-Write
Read and write to RFID tags up to 6cm away. Supports EM4100 series, ISO11785 FDX-B and our own PhidgetTag protocols. The PhidgetRFID Read-Write reads RFID tags that are brought in close proximity to the reader and returns the tag...
₹ 6,909.00 *
Phidgets Dual Relay Board
Phidgets Dual Relay Board
This board has 2 SPDT mechanical relays rated at 210W for DC or 1750VA for AC. The Dual Relay Board allows you to control larger loads and devices like AC or DC motors, electromagnets, solenoids, and incandescent light bulbs. Note: This...
₹ 2,089.00 *
PhidgetSBC4
PhidgetSBC4
Single Board Computer running Debian with 3 high-speed USB ports and 6 VINT ports. 512 MiB SDRAM and 16 GB SD Card. The Phidget SBC4 is a Single Board Computer with six integrated VINT ports. If you've ever wanted your Phidgets to be...
₹ 13,809.00 *
PhidgetBridge 4-Input
PhidgetBridge 4-Input
This board is needed to measure the output from a load cell. You can connect up to four load cells or strain gauges. The PhidgetBridge lets you connect up to 4 un-amplified Wheatstone bridges, such as: Strain gauges Compression load...
₹ 10,359.00 *
5 From 9
Viewed