The Allegro A1304ELHLX-T Hall-Effect Sensor provides a linear voltage output in proportion to a magnetic field. The A1304ELHLX-T has a sensitivity of 4 mv/G with stability over an extended temperature range of –40 to 150ºC. The voltage...

The Allegro A1304ELHLX-05-T Hall-Effect Sensor provides a linear voltage output in proportion to a magnetic field. The A1304ELHLX-05-T has a sensitivity of 0.5 mv/G with stability over an extended temperature range of –40 to 150ºC. The...

The Allegro A1302 Hall-Effect Sensor provides a linear voltage output in proportion to a magnetic field. T he A1302 has a sensitivity of 1.3 mv/G with stability over an extended temperature range of –40ºC to 150ºC. The voltage output of...

The Allegro A1301 Hall-Effect Sensor provides a linear voltage output in proportion to a magnetic field. The A1301 has a sensitivity of 2.5 mv/G with stability over an extended temperature range of –40 to 150ºC. The voltage output of...

The ACS714-5 is a very popular Hall Effect current sensor from Allegro MicroSystems with 5-Amps current monitoring capability and high-speed 5 μS response time. Married to the ADC121C021 (Texas Instruments), one of our favorite...

This Ethernet Overlay Shield brings us one step closer to connecting to the Particle Cloud over Ethernet. This Beta release consists of working hardware capable of negotiating a IP address with a DHCP server and sending/receiving data...

The ISO1541 I2C Isolation Mini Module provides a complete isolation solution for both I2C data and power. This Mini Module uses a ISO1541 to isolate I2C data. Power is isolated using a 100ma Mornson switcher regulator isolated power...

RS-485 Serial Communications Module Our RS-485 Serial Communications Module makes it easy to network up to 256 NCD devices together at distances up to 4,000 feet. Each RS-485 node includes 3 screw-terminals for a 3-wire connection to the...

Web Relay with a Linux Framework Web-i uses an embedded Linux Web Server Module Pre-Programmed with NCD Web-i Firmware Allowing you to Control Anything from Anywhere with just the Internet and a Browser We have just taken Network...

ZRS RS-232 Modular Communications The ZRS series RS-232 interface modules make it easy to communicate RS-232 data to NCD devices. Based on the MAX3232 interface chip, the ZRS converts RS-232 data to 3.3V standard required for NCD...

The TCA9546a is a quad bidirectional I2C multiplexer, providing a single I2C Input and 4 selectable I2C outputs, controlled by the I2C bus. On Power-up, all 4 I2C outputs are disconnected. A 5th I2C output acts as a pass-through from the...

This I2C Multiplexer is an ideal solution for speaking to our entire range of Mini Modules and I2C devices, effectively converting a single I2C port into 8 I2C ports. On-board high-power driver is capable of delivering up to 5 Amps of...