Datasheets Lab Grade Dissolved Oxygen Probe Datasheet LEGACY Lab Grade Dissolved Oxygen Probe Datasheet Documents How to properly cut your probe cable Connecting probes into a pipe RoHS Certificate CE Certificate European legislation...

Reads ORP Range -1900.0mV − 1900.0mV Accuracy +/– 1mV Calibration Single point(remotely though PLC or directly on board) Supported probes Any type & brand Auto Temp compensation N/A Mount 35mm Din rail Output 4 − 20mA Operating voltage...

If you are new to electrochemical sensing, knowing what components you need can get confusing. Let us help you. The Atlas Scientific EZO- Dissolved Oxygen Kit gives you everything you need to take high accuracy, interference-free...

Reads ORP Range -1019.9mV − 1019.9mV Accuracy +/– 1mV Response time 1 reading every 420ms Supported probes Any type & brand Calibration Single point Temp compensation N/A Data protocol SMBus/I2C Default I2C address 0x66 Operating voltage...

This Mini ORP Probe can be fully submerged in fresh water or salt water, up to the SMA connector indefinitely. Reads ORP Range +/- 2000mV Accuracy +/– 1mV Connector Female SMA Response time 95% in 1s Max pressure 100 PSI Max depth 60m...

This product is used to replace the PTFE sensing membrane for the Lab Grade Dissolved Oxygen probes. Specifications: • 2x Lab Grade Dissolved Oxygen probe replacement membranes. This product is used to replace the PTFE sensing membrane...

High accuracy sensors require high accuracy calibration solutions. Atlas Scientific conductivity calibration solutions are made using a six-stage process to ensure the highest accuracy. If you need a certificate on analysis, just email...

High accuracy sensors require high accuracy calibration solutions. Atlas Scientific conductivity calibration solutions are made using a six-stage process to ensure the highest accuracy. If you need a certificate on analysis, just email...

High accuracy sensors require high accuracy calibration solutions. Atlas Scientific conductivity calibration solutions are made using a six-stage process to ensure the highest accuracy. If you need a certificate on analysis, just email...

As a Dissolved Oxygen probe ages, its output signal starts to get weaker. Eventually, you will start to see that the readings are lower than normal. This usually means that it’s time to replace the probes electrolyte solution. Where...

If you are new to electrochemical sensing, knowing what components you need can get confusing. Let us help you. The Atlas Scientific K0.1 EZO- Conductivity Kit is perfect measuring water with a conductivity range from 0.07µs to 50,000µs....

This ORP Probe can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely. Reads ORP Range +/- 2000mV Accuracy +/– 1mV Connector Male BNC Response time 95% in 1s Max pressure 100 PSI Max depth 60m (197 ft)...