This Mini Conductivity Probe can be fully submerged in fresh water or salt water, up to the SMA connector indefinitely. Reads Conductivity Range 5 − 200,000 μS/cm Accuracy +/ – 2% Connector Female SMA Response time 90% in 1s Max pressure...

This pH Probe can be fully submerged in fresh water or salt water, up to the SMA connector indefinitely. Silver / silver chloride Reads pH Range 0 − 14 Accuracy +/– 0.002 Connector Female SMA Resolution +/- 0.0001 Response time 95% in 1s...

Features • 1 Gravity™ Analog pH Sensor / Meter • 1 Silver / silver chloride Consumer Grade pH Probe • 1 SMA to SMA adapter • 3 calibration solutions packets (pH 4, 7 and 10) Gravity™ dimensions 69mm x 32mm (2.7" x 1.2") Weight: 2.53 grams

This ORP Probe can be fully submerged in fresh water or salt water, up to the SMA connector indefinitely. Reads ORP Range +/- 2000mV Accuracy +/– 1mV Connector Female SMA Response time 95% in 1s Max pressure 100 PSI Max depth 60m (197...

The Wi-Fi Hydroponics Meter Kit reads pH, Conductivity, and temperature. The pH and Conductivity readings are automatically temperature compensated and uploaded to ThingSpeak, which allows for remote readings on a phone, tablet or PC....

• 1 meter (3.3') • EZO™ Adapter and 5 pin male header included • Black Silicone Rubber • Cable diameter: 4.85mm • Connects to the following EZO™ Atlas Scientific devices: EZO-PMP™ Embedded dosing pump EZO-CO2™ Embedded NDIR Carbon...

• 12V 1Amp power supply • Power supply connector included • Connects to the Atlas Scientific EZO-PMP™ Peristaltic pump

The EZO-PMP™ Replacement Cassette is available for those who have damaged the cassette and need to replace it, or just wanted to get another one as a backup. These replacement cassettes can be autoclave sterilized.

Features: • Fully assembled touch screen pH meter. • No assembly or setup required. • Includes laboratory grade pH and Temperature probes. • Easily updatable firmware. • Cloud connectivity via MQTT now available! IoT pH Meter comes with...

Features Pre-Assembled Female BNC Connector Low profile Gold plated Brass Includes washer and nut Designed for RF applications Right angle 50ohm impedance Designed to be easily connected into a breadboard for rapid development.

Features For Industrial K 1.0 Calibration 125ml (4oz) Standardized against NIST-certified references 2 year shelf life at room temperature This set includes 1 (1,413µS) and 1 (12,880µS)

Specification Data input UART, I2C and SMBus Max data rate 1 MHz Output voltage 3.9V ± .07 Voltage input 3.0V − 5.0V Power saving EN pin Current consumption 5V – 15 mA 3.3V – 20 mA Circuit dimensions 13.97mm x 20.16mm (0.55″ x 0.79″)...