4-channel I2C-safe Bi-directional Logic Level Converter - BSS138

This product is currently not available.
Please inform me as soon as the product is available again.
₹ 439.00 *

Prices incl. GST

Out of Stock.

  • Adafruit-757
  • 757
  Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors,...more
Product information "4-channel I2C-safe Bi-directional Logic Level Converter - BSS138"

 

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.

Adafruit do have some other handy level shifters in the shop, from the DIP 74LVC245 to the fancy bi-directional TXB0108. However, neither of these are happy to work with I2C, which uses a funky pull-up system to transfer data back and forth. This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP's app note.

This breakout has 4 BSS138 FETs with 10K pullups. It works down to 1.8V on the low side, and up to 10V on the high side. The 10K's do make the interface a little more sluggish than using a TXB0108 or 74LVC245 so we suggest checking those out if you need high-speed transfer.

While Adafruit designed it for use with I2C, this works as well for  TTL Serial,  slow <2MHz SPI, and any other digital interface both uni-directional and bidirectional. Comes with a fully assembled, and tested PCB with 4 full bidirectional converter lines as well as 2 pieces of 6-pin header you can solder on to plug into a breadboard or perfboard.

 

Related links to "4-channel I2C-safe Bi-directional Logic Level Converter - BSS138"
Read, write and discuss reviews...more
Customer evaluation for "4-channel I2C-safe Bi-directional Logic Level Converter - BSS138"
Write a review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed