Top seller
No results were found for the filter!
Rectangular NFC 25x20 Antenna Rectangular NFC 25x20 Antenna is PCB antenna designed with the intention to be used as extension of development boards and placed remotely on desired place such as plastic casing, existing products, or even under displays. Antenna is...
₹ 699.00 *
MyoWare 2.0 Reference Cable The MyoWare® 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor pad into the electrode snap. When ready,...
₹ 189.00 *
MyoWare 2.0 Power Shield The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the top side of the...
₹ 2,199.00 *
MyoWare 2.0 Muscle Sensor Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks... but what if we could take the buttons, levers and joysticks out of the equation and control it...
₹ 4,599.00 *
MyoWare 2.0 Arduino Shield The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack...
₹ 1,599.00 *
MyoWare 2.0 Link Shield The MyoWare® 2.0 Link Shield is designed to easily connect a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller. The shield provides a 3.5mm TRS jack so that you can use a 3.5mm TRS-to-TRS cable to link the boards together. The...
₹ 1,999.00 *
MyoWare 2.0 LED Shield The MyoWare® 2.0 LED Shield is designed to display the magnitude of a target muscle's signal and power the MyoWare 2.0 Muscle Sensor with its built-in battery. The blue 10-segment bar graph shows the magnitude of the measured signal. The...
₹ 3,999.00 *
MyoWare 2.0 Cable Shield The MyoWare® 2.0 Muscle Sensor is designed to be wearable, allowing you to attach biomedical sensor pads directly to the board itself. However, there still may be cases where you want to mount the sensor pads away from the board; this is...
₹ 899.00 *
NVIDIA Jetson AGX Orin Developer Kit Get started developing with the NVIDIA® Jetson AGX Orin™ Developer Kit. It includes a high-performance, power-efficient Jetson AGX Orin module, and can emulate the other Jetson Orin modules. With up to 275 TOPS for running the NVIDIA AI...
₹ 2,04,999.00 *
Raspberry Pi PICO RP2040 Raspberry Pi Pico is a tiny, fast, and versatile board built using RP2040, a brand new microcontroller chip designed by Raspberry Pi in the UK. RP2040: Designed by Raspberry Pi, RP2040 features a dual-core Arm Cortex-M0+ processor with...
₹ 399.00 *
OV9281-110 Mono Camera for Raspberry Pi, Global... OV9281-110 Mono Camera 1MP, Global Shutter, 110°FOV Compatible with Raspberry Pi series boards Device Support Raspberry Pi series Supports 4B / 3B+ / 3A+ / Zero / Zero 2 W, and CM3/3+/4 (extra adapter board required) Specifications...
₹ 3,199.00 *
ATA6570 click UART I2C SPI 4-20 mA R click Pedometer 3 Kria KR260 OAK-D-Lite CT220BMV-HS5 Google Coral Arty S7-25T 1W-TH-IB 1-Wire Adafruit NVIDIA Jetson Nitric Oxide NO I2C Isolator 2 USB I2C click Angle 3 click Motormate Molecular 1-Wire I2C mikroPascal PRO LED - Super iButton click PS 2 click RS485 4 Click CT220RMV-HS5 5 1 DOF 5 1 DOF I2C Isolator 3.3V 3.6A Wires with AT 5220-A RS232 2 click Industrial Weintek H-Flow Optical Developer kit RS485 2 click Expand 3 click RF Meter click mikroBasic PRO NI Multisim PIC clicker USB UART 2 OAK-1 Auto BIGdsPIC6 Emax ES3054 30
Viewed