Key Features: Support for FFC Gen2 and Arducam DepthAI camera modules 4 FFC camera sockets are available Interface for Luxonis 2099 SoM USB 3.1 Gen1 Type-C Passthrough Power-over-Ethernet (PoE) power source 1000BASE-T ethernet for data...

Overview : OAK-SoM-IoT is an embedded variant of OAK-SoM that includes a 128MB NOR flash, and boot-switch capabilities such that it can be booted over USB (for use with our Python API) or set to boot out of NOR-flash, for communication...

DC-DC boost-buck converter is step up and step down converter with wide input voltage range of 12-24V to 7.5V, input rated voltage 12-24V, output voltage 7.5V, moisture-proof and anti-shock protection, high efficiency up to 95%....

DC-DC boost-buck converter is step up and step down converter with wide input voltage range of 12-24V to 3.3V, input rated voltage 12-24V, output voltage 3.3V, moisture-proof and anti-shock protection, high efficiency up to 95%....

DC-DC boost-buck converter is step up and step down converter with wide input voltage range of 12-24V to 3.7V, input rated voltage 12-24V, output voltage 3.7V, moisture-proof and anti-shock protection, high efficiency up to 95%....

OAK-1-W is a wide FOV version of OAK-1, including an IMX378 wide FOV 120° DFOV sensor. Camera Specs Color camera Sensor IMX378 DFOV / HFOV / VFOV 120° / 108° / 93° Resolution 12MP (4032x3040) Focus FF: 50cm - ∞ Max Framerate 30 FPS at...

Overview : The OAK-D W PoE is a Wide Field of View (FoV) version of the OAK-D S2 PoE. It also has industrial M12 PoE connector (instead of RJ45) and additionally features M8 connector for IO connectivity; USB2 (D+, D-), camera IOs (FSIN,...

Overview : The OAK-D S2 PoE is the Series 2 version of the OAK-D-PoE . The main difference is that the OAK-D S2 PoE has a smaller enclosure and is therefore lighter. It also has industrial M12 PoE connector (instead of RJ45) and...

Overview : The OAK-D S2 PoE is the Series 2 version of the OAK-D-PoE . The main difference is that the OAK-D S2 PoE has a smaller enclosure and is therefore lighter. It also has industrial M12 PoE connector (instead of RJ45) and...

Overview : The OAK-D CM4 PoE is an upgraded version of OAK-D-CM4, as PoE is used both for power delivery and communication for the Rasbperry Pi Compute Module 4, plus it comes in a IP67 rated enclosure. The enclosure is about the size as...

Overview : The OAK-FFC-6P baseboard has 6 FFC interfaces which allows for six 2-lane MIPI camera modules. It is the first device from OAK Series 3 (Keem Bay VPU) and uses the OAK-SoM-Max. To see which cameras are compatible with this OAK...

Overview : The OAK-FFC-pToF is a carrier board for the Sunny MTP006 pTOF camera module, and is designed to be compatible with OAK-FFC-3P, OAK-FFC-4P, and DepthAI RPi HAT baseboards. It’s currenty in beta stage so you have to use a custom...