The Mid-70 is another component adding to the overall market appeal for Livox with tailored use applications such as low-speed autonomous driving and mobile robotics. By significantly expanding the vertical viewing angle, reducing blind...

OAK-D Pro is the ultimate camera for robotic vision that perceives the world like a human by combining active stereo depth camera and high-resolution color camera with an on-device Neural Network inferencing and Computer Vision...

This PM07 Power Module supplies clean 5.2V to flight controller from the battery and provides current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable, along with integrated esc power & signal...

This USB-to-I²C adapter functions as a bridge between I²C devices and a PC or other USB host, enabling the USB host to serve as an I²C controller and communicate with target devices on the I²C bus. It supports bidirectional communication...

This board functions as a solid state, single-pole, single-throw (SPST) relay or switch that can be activated by a low-current control signal between 2.7 V and 40 V. The switching is performed by a pair of MOSFETs controlled by an...

We are offering these breakout boards with support from Allegro Microsystems as an easy way to use or evaluate their ACS37800KMACTR-030B3-I2C isolated power monitoring IC; we therefore recommend careful reading of the ACS37800 datasheet...

This board functions as a solid state, single-pole, single-throw (SPST) relay or switch that can be activated by a low-current control signal between 2.7 V and 40 V. The switching is performed by a pair of MOSFETs controlled by an...

We are offering these breakout boards with support from Allegro Microsystems as an easy way to use or evaluate their CT220 tunneling magnetoresistance (TMR), contactless current sensors; we therefore recommend careful reading of the...

We are offering these breakout boards with support from Allegro Microsystems as an easy way to use or evaluate their CT220 tunneling magnetoresistance (TMR), contactless current sensors; we therefore recommend careful reading of the...

These 0.1" straight female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs . The standard spacing is the same as on most solderless breadboards and matches 0.1" male header...

Make sure your Crazyflie 2.1 Brushless keeps charging while on the ground with this charging dock. Note: The charger is only compatible with the Crazyflie 2.1 Brushless, not the Crazyflie 2.1+ or other brushed versions of the Crazyflie....

The DST1200 accurately measures distances between 40mm and ~10m. Use this Phidget for motion sensing, object detection, or spatial awareness. This Phidget connects to your computer through a VINT Hub. Features Measure the distance of...