Top seller
No results were found for the filter!
M9N GPS(Standard (10-Pin)) The M9N GPS uses multi-constellation GNSS powered by u-blox M9N, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations,...
₹ 8,349.00 *
Kakute H7 v1.3 (MPU6000) The Holybro Kakute H7 v1.3 Flight Controller is full of features including integrated Bluetooth, dual plug-and-play 4in1 ESC ports, HD camera plug, barometer, OSD, 6x UARTs, full Blackbox MicroSD card slot, 5V and 9V/3A BEC, easy...
₹ 10,279.00 *
Kakute H7 v1.3 Stacks +Tekko32 F4 4in1 50A ESC The Holybro Kakute H7 v1 Flight Controller is full of features including integrated Bluetooth, dual plug-and-play 4in1 ESC ports, HD camera plug, barometer, OSD, 6x UARTs, full Blackbox MicroSD card slot, 5V and 9V BEC, easy soldering...
₹ 18,029.00 *
MSPM0L1306 LaunchPad™ development kit for... The LP-MSPM0L1306 LaunchPad™ development kit is an easy-to-use evaluation module (EVM) based on the MSPM0L1306. It contains everything needed to start developing on the MSPM0L1306 M0+ MCU platform, including on-board debug probe for...
₹ 2,499.00 *
MSPM0G3507 LaunchPad™ development kit for... The LP-MSPM0G3507 LaunchPad™ development kit is an easy-to-use evaluation module (EVM) based on the MSPM0G3507. It contains everything needed to start developing on the MSPM0G3507 M0+ MCU platform, including on-board debug probe for...
₹ 2,499.00 *
MSPMC1104 LaunchPad™ development kit for 24-MHz... The LP-MSPM0C1104 LaunchPad™ development kit is an easy-to-use evaluation module (EVM) based on the MSPM0C1104. It contains everything needed to start developing on the MSPM0C1104 M0+ MCU platform, including on-board debug probe for...
₹ 899.00 *
Wireless Tracker with antenna - 868mhz Summary Wireless Tracker is a development kit based on ESP32-S3FN8. It integrates both SX1262 and UC6580 to provide fast GNSS solution for IoT. It can track any object and then upload that data wirelessly by Wi-Fi, Bluetooth, LoRa, and...
₹ 4,049.00 *
Atlas Scientific i3 InterLink The Atlas Scientific i3 InterLink is designed for quick and straightforward integration with a Raspberry Pi, enabling the reading of various EZO devices. It is equipped with two isolated EZO circuit slots and one non-isolated slot, along...
₹ 6,349.00 *
EZO-HUM™ Embedded Humidity Probe – Plastic Body Engineered for diverse applications, including environmental monitoring and industrial processes, this humidity probe is crafted with a photosensitive resin body. This design guarantees the probe’s durability and versatility, making it...
₹ 7,249.00 *
Gas Flow Cap This screw-on cap is designed for our line of gas and humidity sensors. The input/output ports are designed to work with standard 3/16″ airline tubing. The part is simple, and how it works can be understood just by looking at it. One...
₹ 2,199.00 *
Gen 3 Industrial pH Probe – No Temp This pH probe is designed for commercial or industrial pH monitoring applications where an integrated temperature sensor is not required. Embedding a temperature sensor into a pH probe is a complex and expensive task. By not adding the...
₹ 28,599.00 *
Arduino Due - Flash 2 click Pimoroni pHAT RS232 485 422 Flow deck v2 Buck 10 Click Arty A7-100T ST-LINK V2 mini OAK-D Short MCP2518FD click MG996R Servo BLE TX Click Proto NOR Electret NVIDIA Jetson Roller Switch Pololu Simple Timeout ES3301 Ambient 3 Click Opto 3 click Slider 2 Click Branch High Power Power Pack for Air quality PYNQ-Z1 Python 5.65inch ACeP Filter Temp Hum 9 XOR ReSpeaker Core Solid State Mix LED SMD RGB Split NVIDIA Jetson ReSpeaker 4-Mic 3G SARA click SiK Telemetry 6DOF IMU 4 General Driver IR Led Crazyflie 2.1 RS232 2 click
Viewed