The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations,...

The Holybro Kakute H7 v1 Flight Controller is full of features including integrated Bluetooth, dual plug-and-play 4in1 ESC ports, HD camera plug, barometer, OSD, 6x UARTs, full Blackbox MicroSD card slot, 5V and 9V BEC, easy soldering...

The M9N GPS uses multi-constellation GNSS powered by u-blox M9N, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations,...

The LP-MSPM0L1306 LaunchPad™ development kit is an easy-to-use evaluation module (EVM) based on the MSPM0L1306. It contains everything needed to start developing on the MSPM0L1306 M0+ MCU platform, including on-board debug probe for...

The LP-MSPM0G3507 LaunchPad™ development kit is an easy-to-use evaluation module (EVM) based on the MSPM0G3507. It contains everything needed to start developing on the MSPM0G3507 M0+ MCU platform, including on-board debug probe for...

The LP-MSPM0C1104 LaunchPad™ development kit is an easy-to-use evaluation module (EVM) based on the MSPM0C1104. It contains everything needed to start developing on the MSPM0C1104 M0+ MCU platform, including on-board debug probe for...

Summary Wireless Tracker is a development kit based on ESP32-S3FN8. It integrates both SX1262 and UC6580 to provide fast GNSS solution for IoT. It can track any object and then upload that data wirelessly by Wi-Fi, Bluetooth, LoRa, and...

Engineered for diverse applications, including environmental monitoring and industrial processes, this humidity probe is crafted with a photosensitive resin body. This design guarantees the probe’s durability and versatility, making it...

The Atlas Scientific i3 InterLink is designed for quick and straightforward integration with a Raspberry Pi, enabling the reading of various EZO devices. It is equipped with two isolated EZO circuit slots and one non-isolated slot, along...

This screw-on cap is designed for our line of gas and humidity sensors. The input/output ports are designed to work with standard 3/16″ airline tubing. The part is simple, and how it works can be understood just by looking at it. One...

This pH probe is designed for commercial or industrial pH monitoring applications where an integrated temperature sensor is not required. Embedding a temperature sensor into a pH probe is a complex and expensive task. By not adding the...

The Atlas Scientific i1 InterLink is designed for quick and straightforward integration with an Arduino, enabling the reading of various EZO devices. It is equipped with three isolated EZO circuit slots and one non-isolated slot, along...