Prices incl. GST
Out of Stock.
- Product Code: CH-9251-P
- MPN: 9251-P
Sensor specifications (SQ-110)
Sensibility: 0.200 mV / μmol·m-2s-1
Calibration factor: 5 μmol·m-2s-1 / mV
Non-linearity: < 1% (up to 4000 μmol·m-2s-1 / mV)
Non-stability (long-term drift): <2% per year
Spectral range: 410 ~ 655 nm
Accuracy: ±5%
Repeatability: <1%
Diameter: 2.4 cm
Height: 2.8 cm
Cable length: 5 m of shielded, twisted-pair wire
Operation temperature: -40 ~ 70 ºC
Operation humidity: 0 ~ 100% RH
The SQ-110 sensor, specifically calibrated for the detection of solar radiation, provides at its output a voltage proportional to the intensity of the light in the visible range of the spectrum, a key parameter in photosynthesis processes. It presents a maximum output of 400 mV under maximum radiation conditions. In order to improve the accuracy of the reading, this is carried out through a 16 bits analog-to-digital converter that communicates with the microprocessor of the mote through the I2C.
Sensor specifications (SU-100)
Sensibility: 0.2 mV / μmol·m-2s-1
Calibration factor: 5.0 μmol·m-2s-1 / mV
Non-stability (long-term drift): <3% per year
Non-linearity: <1% (up to 300 μmol·m-2s-1)
Spectral range: 250 ~ 400 nm
Accuracy: ±10%
Repeatability: <1%
Diameter: 2.4 cm
Height: 2.8 cm
Cable length: 5 m shielded, twisted-pair wire
Operation temperature: -40 to 70 ºC
The SU-100 sensor, complementary to the SQ-110 sensor, provides at its output a voltage proportional to the intensity of the light in the ultraviolet range of the spectrum. It presents a maximum output of 26 mV under maximum radiation conditions. This sensor is read by the mote through the same 16 bits analog-to-digital converter used with the SQ-110 sensor.